You will use 0.5 to 2 fluid oz of Bonide Liquid Copper Fungicide Concentrate per gallon of water, depending on the disease you are treating. You can view the full application instructions on the product label here.
Bonide Liquid Copper Fungicide Concentrate can be applied to Ornamentals, Lawns, Roses, Fruits and Vegetables.
You can continue spraying your blackberries with Bonide Liquid Copper Fungicide Concentrate every 7-10 days up until the day of harvest.
Yes, Bonide Liquid Copper Fungicide Concentrate is labeled for Rhizoctonia blight on the listed plants.
We recommend identifying the fungus that your plum tree has. If you're dealing with black knot, Bonide Liquid Copper Fungicide Concentrate is not labeled for it. According to articles by Ohio State and the University of Maine, this is a fungus that can't be treated but there are a few things that can be done, one thing mentioned is using Chlorothalonil which can be found in Fung-Onil Multi Purpose Fungicide Concentrate which can be used on plum trees but it's also not labeled for this type of disease. We recommend reading over these articles and consulting with your local extension office.
Bonide Liquid Copper Fungicide Concentrate can be used on roses at the rate of 0.5 to 2.0 fluid ounces of product per gallon of water. You can view the product label here.
Bonide Liquid Copper Fungicide Concentrate is not a ready to use product. It has to be diluted with water before application. Please refer to the product label for complete application instructions.
There is no specific pre-harvest interval time when using Bonide Liquid Copper Fungicide Concentrate on apples. You can apply the product up until the harvest day.
Bonide Liquid Copper Fungicide Concentrate is labeled for use on plants in greenhouses and shadehouses and for hydroponics. The lights should not have any affect on this product or phytotoxicity. Please refer to the product label for complete application instructions and precautions.
We recommend using your diluted solution of Bonide Liquid Copper Fungicide Concentrate within 24 hours. If it has already been diluted and stored for a few days, it will lose it's efficacy.
Ideally, apply Bonide Liquid Copper Fungicide Concentrate before fungus is visible. Otherwise, apply the product immediately when you first notice signs of fungal disease. If the fungus is on fruit trees or vegetable plants, you can safely continue to spray every seven to 10 days until harvest.It should be applied when you are not expecting rain for at least 24 hours following the application. There is no specific pre harvest interval time for the Bonide Liquid Copper Fungicide Concentrate on tomatoes. You can apply the product up until the harvest day.
Bonide Liquid Copper Fungicide Concentrate is not labeled for use on anything smokeable. We would recommend checking directly with Bonide for advice on this use. Bonide can be reached at (315) 736-8231.
Bonide Liquid Copper Fungicide Concentrate is not labeled specifically for wet rot on oak trees. It is labeled for applications on roses, fruit and vegetables for the following types of rot: Phytophthora brown rot, Brown rot, Bottom rot, Black rot,Bacterial soft rot, Soft rot, Bacterial stalk rot, Neck rot, Rhizopus fruit rot, Fruit rot, Anthracnose fruit rot.
Bonide Liquid Copper Fungicide Concentrate does not list that it can be used on evergreens other than Chinese Evergreens.
The use rate for Bonide Liquid Copper Fungicide is anywhere between 0.5 and 2 oz. per gallon of water per 1000 sq. ft., depending on what you are treating for. Please refer to the product label for specific application rates.
Bonide Liquid Copper Fungicide Concentrate is not labeled to control brown patch in lawns. Clearys 3336F would be a better option.
Bonide Liquid Copper Fungicide Concentrate is labeled for use on various palms to treat leaf spot. If you have a different disease, then we may be able to recommend a more appropriate product for you.
Bonide Liquid Copper Fungicide Concentrate should be treated around the area as well. The residual of the product will only adhere to the areas it was applied to and dried on.
Bonide Liquid Copper Fungicide Concentrate is applied at the rate of 0.5 to 2.0 fluid ounces (1-2 tbsp) per gallon of water per the product label.
Bonide Liquid Copper Fungicide Concentrate needs to be applied directly to the tree itself as directed on the product label.
