Once Bora-Care has dried completely on the raw, unfinished wood, you can seal, stain or paint with whatever product you would like. There are no restrictions on what you can use once the product is dry.
Bora-Care should be sprayed on all exposed sides of the raw, unfinished wood that you’re trying to protect. If will not absorb properly into adjacent wood that has not been treated.
Bora-Care will not work for carpenter bees. For carpenter bee control, we recommend our Carpenter Bee Control Kit.
Bora-Care cannot be applied to the soil, only to raw wood. If you are trying to treat for subterranean termites around the perimeter of your home you can use Taurus SC in the soil. Please take a few moments to view our Subterranean Termite Treatment Guide for more information on the treatment method.
One gallon of Bora-Care will treat approximately 100 lineal feet of 2 x 4 stud wall. You would want to make sure the product has completety dried before restacking. This can typically take up to 48 hours
Bora-Care can only be applied to raw wood that has not been painted, stained or sealed. You would need to sand the wood down to the original raw state before applying.
Bora-Care is only for use on cut timber not currently still growing.
Termites do not attack live, healthy trees. If the tree has been damaged by termites it would be advisable to remove the tree. They are natures recyclers so they go after dead/decaying wood more with high moisture content as well. Most people are primarily concerned with protecting the big investment, their home. Please take a moment to read over our article on "How to do a Termite Treatment" for complete details. In most cases, termites out in the yard are completely normal and can be left alone. However if in non fruit bearing trees and you can locate and directly spot treat the nest in the tree you can use something like Termidor SC after drilling into the gallery to be sure you are making contact where they are actively are.
Boracare can be applied to concrete, however, it would be best to treat the wood itself before it is stained or finished. Treating the slab only would not offer the same protection.
Sawdust from Boracare treated wood would be no more toxic that untreated wood, though you should avoid breathing in either. You should cut the wood to the final size before treating with Boracare. You do not want to waste the product on wood that will not be used and as Boracare can take up to 30 days to completely penetrate.
Boracare is only able to penetrate into raw, untreated, unstained or painted wood therefore it would not penetrate into plywood with varnish on it. You will need to sand down to the raw wood or pull up the flooring to expose the unvarnished underside and treat that.
Wood just needs to be dry before applying Bora-Care. There is no specifics on the time of day it should be applied. As long as you are not expecting rain in the next 48 hours. It can take up to 48 hours for it to dry after application. It should dry clear when mixed as directed and would not affect stain once dry.
You will want to use a slower spray to apply Bora-Care, as the product needs time to coat the wood and not have excess runoff.
If you are using Bora-Care as a preventive you will treat any raw untreated wood that you believe may be vulnerable to termite damage. If you are treating an active infestation you will need to apply it to all raw untreated wood where you have termite activity. Typically a full sub floor treatment would not be necessary for a house on a crawl space but we also recommend having some other termite prevention in place like termite bait stations or a termite trench treatment.
Bora-Care is not applied to live trees. You may want to check with your local extension office. Once a tree is already infested, the goal turns to protecting the surrounding trees for most borers.
If the covered parking area is constructed of wood, it needs to be painted or sealed within 6 weeks after a treatment of Bora-Care. Per the product label, it is important to allow the treated wood to completely dry at least 48 hours before applying any protective topcoat.
Bora-Care does not remove moisture. It is labeled to treat raw wood for the following: Wood Destroying Fungus, Termite Control and wood-destroying insects such as termites, carpenter ants, powderpost beetles, etc.
Bora-Care should be applied to all sides of raw wood as directed.
Bora-Care should be applied uniformly and evenly on all sides of raw wood either by spraying or painting on as directed on the label.