Cutrine Plus Algaecide is applied at a rate of 0.6 - 1.2 gallons per acre foot of water treated. We are unsure what you mean by breaking the surface tension, but you can refer to the product label for complete application instructions. You may also contact the manufacturer directly for product support by calling 1-800-558-5106, or via their website's contact page here.
Application rates of Cutrine Plus Algaecide range from 0.6 to 1.2 gallons per acre foot of water treated depending on what type of algae you’re treating for. The typical dilution range of water to Cutrine Plus Algaecide is 9:1 when using a backpack-type sprayer ( 1 part Cutrine and 9 parts water). The exact rate will depend on the specific issue you're treating for. Please see the product label for complete application instructions.
The product label does not specifically mention the affect on equines. We would ask that you call the manufacturer of Cutrine Plus Algaecide directly as they are the true experts on their own product. You can reach them at 1-800-558-5106.
We apologize but are not familiar with Euglena to know if safe to spray Cutrine Plus Algaecide, we would recommend reaching out to the manufacturer directly to discuss. They can be reached at 1-800-511-6737
According to the manufacturer, there is no wait time for swimming after applying Cutrine Plus Granular Algaecide. We would recommend waiting an hour just for the product to have time to settle.
Cutrine Plus Algaecide is labeled to control a broad range of algae, including Filamentous types of green algae (mat-forming/blanket weed) at the rate of 0.6 - 2.4 gallons per acre foot of water treated. You can refer to the product label for complete application instructions, and use as directed.
The typical dilution range of water to Cutrine Plus Algaecide is 9:1 when using a backpack-type sprayer or up to 50:1 when using water pump equipment or large tank sprayers. Please read the complete product label for all application directions and precautions.
Cutrine Plus is intended for large bodies of water and cannot be used in fountains. At this moment we don't carry anything labeled to treat algae in a small fountain. You may need to check your local stores to see what they have that may help.
We were able to find a couple articles that may be offer other tips to care for your fountain:
https://homeguides.sfgate.com/prevent-algae-garden-fountains-41269.html
https://www.hunker.com/13425698/how-to-remove-and-prevent-algae-in-a-fountain
Cutrine Plus Algaecide may cause fish toxicity to some species of fish. While Bluegills is not specifically listed on the product label we recommend contacting the manufacturer to be safe. Applied Bio Chemists can be reached at (800) 558-5106.
Reward Herbicide can be mixed with an approved algaecide according to the product label.
Cutrine Plus Algaecide is applied at a rate of 0.6 - 1.2 gallons per acre foot of water treated. The exact number of gallons of product you use will depend on how large of a surface area you’re treating. Please refer to the manufacturer's product label for specific application information and the attached tables for determining the amount of product you would need for your pond. For additional technical support, the manufacturer can be reached by visiting their website's contact page by clicking here.
Due to liability issues, we do not make any recommendations for ponds with koi or goldfish because of the sensitive nature of these fish. We recommend you contact the manufacturer or a koi expert for assistance. We apologize we could not be helpful today.
Per the product label, waters treated with Cutrine Plus Algaecide may be used for swimming, fishing, further potable water treatment, livestock watering or irrigating turf, ornamental plants, or crops after treatment. It is recommended to let the treatment settle for 1-2 hours before allowing livestock around the water.
No, Cutrine Plus Algaecide is not labeled for use on wood, only in water.
You will use 1.5-2 gallons per surface acre of pond using Cutrine Plus Algaecide. The number of gallons of product you use will depend on how large of a surface area you’re treating.
We do not see anything on the Cutrine Pus Algaecide label that says it is unsafe for carp or anything regarding water hardness. It does mention that trout could be harmed if the water is too soft or acidic. There are a few different ways to go about testing your water levels so you may want to just google a few options or videos to see what is easiest or best for you.
Cutrine Plus Algaecide is only labeled for controlling algae, we are not aware of any other off label usages such as control of bugs.
The Cutrine Plus Algaecide mixing ratio will depend on what and how you are treating. It is not usually recommended for use in a hose-end sprayer. Please consult the product label for complete application instructions. Feel free to call us at 866-581-7378 with any questions.
Application rates of Cutrine Plus Algaecide range from 0.6 to 1.2 gallons per acre foot of water treated depending on what type of algae you’re treating for. The exact rate will depend on the specific issue you're treating for. Please see the product label for complete application instructions.
No, Cutrine Plus Algaecide is designed for use in large bodies of water such as ponds, lakes, and reservoirs and not in small containerized water. Usually salt water tanks will need to be cleaned thoroughly and the nutrient levels in the water may need to be adjusted to reduce the likelihood of growth of the algae. We would recommend trying to identify what specific algae you need to treat for the best recommendation.
