Eraser A/P Herbicide - Questions & Answers

Displaying 21 to 36 (of 36 questions)
Sort:
  • Asked by Jack from Oklahoma
    01/19/2018
    Q
    How long do I need to wait to let sheep graze after using Eraser on my pasture?
    A

    The Eraser A/P is labeled to be used in pastures and grazing areas with a 7 day interval needed before feeding treated hay/grasses or allowing grazing for the animals. 

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Michael from Chantilly, Va
    04/17/2016
    Q
    Is Eraser A/P harmful to my lawn/grass?
    Will this product kill my my grass as I spot treat weeds in my lawn? My home is located in Northern VA.
    A

    Eraser A/P is comparable to Roundup and could harm turf grass. Be sure to apply on a less windy day as you spot treat. 

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Tom from Fl
    05/23/2016
    Q
    Do you have Martins Eraser A/P in a 2.5 gallon?
    A

    Yes, we carry Martins Eraser A/P in a 2.5 gallon container and offer free shipping. Please let us know if you need anything else.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Amanda from Pueblo, Colorado
    06/30/2021
    Q
    Will Eraser A/P get rid of a puncturevine infestation?
    My front lawn is completely taken over by puncturevine. It wasn't too bad until we tilled and planted grass seed a year ago, but as soon as we watered the grass seed it took completely over the lawn and killed everything except its other weed buddies. Would this do the trick to get rid of this pesky weed?
    A

    Yes, Eraser A/P is labeled to treat puncturevine but will also kill any grass sprayed. Please see the label for complete application instructions. 

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Jared from Ider
    07/29/2019
    Q
    Are there 2 different kinds of Eraser A/P? Are there "crop" and "non-crop" versions?
    A

    Eraser A/P has a label that includes both crop and non-crop applications. Regular Eraser in the smaller sizes does not have the crop/agricultural label.

    Was this answer helpful to you?   Yes No
    2 of 3 people found this answer helpful.
  • Asked by Chad from Waco, Tx
    09/27/2018
    Q
    What is the mix rate for Eraser A/P? How long does it take to see results?
    A

    You should be mixing 1 1/3 oz. of Eraser per gallon of water to control most annual weeds and 2 2/3 oz. per gallon of water for most perennial weeds.  Effects are visible on most annual weeds within 2 to 4 days, but on most perennial weeds effects may not be visible for 7 days or more. Extremely cool or cloudy weather following treatment may slow activity of this product and delay development of visual symptoms.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Jason from Commerce, Tx
    05/07/2018
    Q
    Is Eraser A/P safe for trees as long as you spray it at the base and it does not come in contact with the leaves?
    A

    Eraser A/P can be sprayed around trees and should not harm them as long as you do not spray the roots or foliage directly. 

    <body id="cke_pastebin" >

    Eraser A/P can be sprayed around trees and should not harm them as long as you are not spraying the foilage or roots directly.

     

    </body>
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Beverly from Bogart, Ga
    04/17/2018
    Q
    Will Eraser A/P kill monkey grass/liriope?
    A

    Eraser AP is a non-selective herbicide, so it will affect any plants on which you spray it. It is best to cut the grass and then spray the new sprouts. This may take several applications to completely kill the grass. If you physically remove it, be sure to dig deeply enough to remove all the roots so that the plants do not return. This article has more tips: http://homeguides.sfgate.com/control-liriope-spicata-64850.html 

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Vince from Downingtown, Pa
    03/29/2020
    Q
    How long after application before I can mow?
    A
    According to the manufacturer, these are their recommendations: 

    "For best results, mow cool season grass covers in the spring to even their height and apply this product 3 to 4 days after mowing."

    "For suppression of vegetative growth and seedhead inhibition of bahiagrass for approximately 45 days, apply 6 fluid ounces of this product in 10 to 25 gallons of water per acre. Apply 1 to 2 weeks after full green-up or after mowing to a uniform height of 3 to 4 inches. This application must be made prior to seedhead emergence."

    For specific application, and mowing instructions please refer to the product label: 

    https://www.domyown.com/msds/Eraser_AP_Label.pdf

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by William from Marvin. Nc
    04/07/2021
    Q
    Does Eraser kill poison ivy?
    A

    Yes, Eraser A/P would have the ability to control poison ivy if sprayed thoroughly and at rates around 4 oz or so per gallon of water. Since poison ivy is a woody based plant, sometimes applications with products geared towards those species will work better than a traditional glyphosate option like Eraser. An alternative choice would be Crossbow Herbicide which can be used by itself or with the Eraser in areas where you want complete control of anything you spray it on. 

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Gerald
    07/08/2021
    Q
    Is Eraser A/P Herbicide recommended for use around farm ponds ?
    A

    This product should not be used in or around ponds, lakes, streams or other areas of water. Reward Landscape and Aquatic Herbicide may be better suited for your needs. 

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Angelo from Myrtle Beach, Sc
    01/11/2021
    Q
    Will Eraser A/P Herbicide kill deep rooted wild onion plants? Wild onions (Allium canadense)
    Wild onions (Allium canadense)
    A

    While a non selective herbicide which in theory should kill wild onions, Eraser A/P is not labeled to target wild onions.  You may consider using Ferti-lome Weed Free Zone, which is a post-emergent herbicide that controls a wide range of broadleaf weeds in cool and warm-season residential lawns, including wild onion.  Please refer to the product label to make sure your lawn type is included on the tolerance list, and for application instructions.

    Was this answer helpful to you?   Yes No
  • Asked by Klaas from Wagener, Sc
    03/30/2021
    Q
    More or less water per acre for Eraser A/P Herbicide
    The book tells me to use up to 5 quarts Eraser A/P 41% per acre mixed in the tank sprayer with 3-20 gallon of water to control Bahia. That's a huge range. How do I figure if I should apply with just 3 gallons of water per acre or as much as 20?
    A

    The water volume used or needed when applying Eraser A/P or other herbicides, depends on the density of the weeds that are being sprayed, and the type of equipment that is being used. Most customers do not have the type of equipment that can provide adequate low volume coverage like is indicated in the 3 gallon per acre rate. On average, most will use between 20-40 gallons of water per acre, sometimes more, to make sure you get sufficient coverage over the target weeds when broadcasting the acreage. The standard application volume for post emergent treatments is a gallon of water to every 1000 sq/ft you intend to spray over. 

    Was this answer helpful to you?   Yes No
  • Asked by Gary from Mooresville Nc
    08/23/2021
    Q
    Is Eraser A/P Herbicide effective at killing actively growing dallisgrass?
    A

    Eraser A/P Herbicide is labeled to kill Dallisgrass in early stages of growth at the 2% Spray Solution of 3-5 quarts per acre in 3-20 gallons of water. For smaller spot treatments, apply at the rate of 2.7 fl oz per gallon of water. Established dallisgrass may not be controlled effectively and may require repeat applications. Eraser A/P is a non selective herbcide that will kill not only weeds, but also turfgrass and desirable ornamentals, shrubs, trees if overspray or winddrift contacts the plants. Bare spots can be reseeded or resodded after 2 weeks. 

    Refer to the Spray Solution Chart on page 7 of product label 

    Was this answer helpful to you?   Yes No
  • Asked by Nelson
    08/26/2021
    Q
    Will Eraser A/P Herbicide kill pond moss?
    A

    Eraser A/P Herbicide is not labeled for pond moss nor labeled to be used in lakes, ponds, or bodies of water. 

    We would recommend using Crystal Plex Algae Control or Crystal Blue Copper Sulfate to treat for Filamentous algae aka pond moss. 

    Was this answer helpful to you?   Yes No
  • Asked by Joe from Kerr County, Texas
    09/24/2021
    Q
    Mixture of Eraser A/P to kill sand burrs?
    A

    Eraser A/P Herbicide is non-selective broad-spectrum herbicide that can be applied at a rate of 1.33  - 2.66 oz. per gallon of water for spot treating annual and perennial weeds such as sand burr.

    Was this answer helpful to you?   Yes No
Displaying 21 to 36 (of 36 questions)