Ranger Pro Herbicide can be used in and around a vegetable garden plot (keep away from any desirable plants) but you should wait at least two weeks before you plant anything in the area where the product was applied. This is to allow time for the treated plants to die completely before you remove them or till the area.
If dogs enter the Ranger Pro Herbicide treated area while wet, it can be harmful to them. We recommend to keep people and pets out of the treated area until dry.
Ranger Pro Herbicide is safe if used as directed. Only the applicator should be present during the treatment and then leave. All others including children and pets should return when treated areas are completely dry. We do offer chemical resistant gloves, mask, goggles, coveralls in our Basic Safety Kit for the applicator.
Ranger Pro is a nonselective herbicide, so it will kill just about anything it is applied to, including grass and weeds.
Ranger Pro is labeled to eradicate poison ivy. You will mix 2 2/3 fluid ounces per gallon of water per 1,000 sq ft.
Per the product label: Ranger Pro Herbicide may be tank-mixed with other herbicides to provide residual weed control, a broader weed control spectrum or an alternate mode of action. Always read and follow label directions for all products in the tank mixture. Use according to the most restrictive precautionary statements for each product in the mixture. Any labeled rate of this product may be used in a tank mix. When this label describes a tank mixture with a generic active ingredient such as diuron, 2,4-D or dicamba, the user is responsible for ensuring the mixture product label allows the specific application.
Per refer to the product label for complete instructions.
Ranger Pro Herbicide will not harm mature trees when applied around the base of a tree. Just be sure to avoid drift/over spray from contacting foliage.
Areas that have been treated with Ranger Pro Herbicide are typically dry within a few hours. We would recommend waiting at least 4 hours before allowing children or pets to return to the area.
Ranger Pro Herbicide can be applied and then a couple weeks later re-seed those areas.
You can paint Ranger Pro on the stump at full strength. It would also be advisable to drill into the stump or make cuts so that the stump will take up the product better. Please see the Label for complete application instructions.
You should start seeing results within 7-14 after applying Ranger Pro Herbicide. You can reapply after 2 weeks if necessary.
Ranger Pro Herbicide comes in a 2.5 gallon jug. Per the product label, you will mix between 1-10 quarts per 25 gallons. You will not want to exceed 10.6 qts per acre per year. It states that you can mix 1-20 gallons per 200 gallons of water. Please refer to page 3 of the product label for specific mixing and application instructions.
You can use a Glyphosate product like Ranger Pro and paint on the stump full strength. It would also be advisable to drill into the stump or make cuts so that the stump will take up the product better.
No, Ranger Pro Herbicide is not labeled for use around any edibles. It is recommended that you spray outside of the drip line of any edibles or desirable plants.