Talstar P mixed with an Insect Growth regulator such as Nyguard IGR would be a good choice for tick control. Talstar P would work to kill ticks that come into contact with treated surfaces while the Nyguard would work to help stop juvenile ticks from reaching sexual maturity. We recommend using the highest usage rate of 1 oz Talstar and 1 oz of Nyguard IGR per gallon of water.
There is no particular time that you have to spray. Most people spray outside in early in the morning or when there is the least amount of insect activity. You will mix 1 oz of Talstar P with 1 gallon of water. That will treat 1,000 sq feet.
Yes, Talstar P does a great job controlling Japanese Beetles. You will mix 1 oz per gallon of water per 1,000 sq ft. Talstar P should be applied every 30 days.
Talstar P (Talstar One) is an insecticide and will not affect snakes or toads.
Talstar P can be used to kill carpenter ants that are sprayed directly or which contact the residual spray. However, Talstar P will not transfer throughout an ant colony to kill the entire colony. If you are finding carpenter ants trailing indoors, then we recommend our Indoor Carpenter Ant Kit, which includes two different baits, refillable bait stations, and a residual spray with two active ingredients. If the ants are in a wall void and you are unable to bait for them, then another great option is applying a ready-to-use non-repellent foam such as FUSE Foam into the wall void where the nest is. Please refer to our online Carpenter Ant Treatment Guide for more tips.
We generally recommend using a pyrethroid such as Talstar P Professional Insecticide or Permethrin SFR as a preventative treatment in late spring/summer before egg hatch to protect trees. If trees are badly infested, then they should be removed and either chipped or burned.
Keep in mind that trees which become infested with bark beetles are almost always susceptible due to some other existing weakness such as drought or disease.
Yes. Talstar P Professional Insecticide is labeled for treating mealybugs.
Talstar P (Talstar One) should NOT be applied to lemon trees or other edible vegetation. If the edibles were treated, you should not consume the fruit. Please provide the targeted pest for an alternate product recommendation for treatment.
Yes, Talstar P can be used for fire ant control in the type of sprayer you described, but you will also need to do mound drenching. According to the Talstar P product label, "Fire Ant Mound control is optimized by combining broadcast applications that will control foraging workers and newly mated fly-in queens with mound drenches that will control existing colonies. If the soil is not moist, then it is important to irrigate before application or use a high volume application. Apply broadcast treatments at 0.5 to 1 fluid oz. per 1,000 square feet. Use enough finished volume to penetrate thatch or sod. Treat mounds by applying 1 oz of Talstar P per mound in 1 to 2 gallons water by sprinkling the mound until it is wet and treat 3 feet out around the mound. Use the higher volume for mounds larger than 12”. Treat mounds with sufficient force to break their apex and allow the insecticide solution to flow into the ant tunnels. For best results, apply in cool weather (65 - 80F) or in early morning or late evening hours."
Talstar P is applied at the rate of 1 oz. per gallon of water per 1000 sq. ft. for June bugs. You can apply monthly outdoors and every 90 days indoors.
Talstar will kill any wasp, bee, or hornet that comes into contact with a treated area. Keep in mind that this is not a contact kill product, so it can take up to 24 hours for an insect to die after contacting a treated surface. You can also use a product like Wasp Freeze as a contact kill. If you know where any of the nests are located, you can use Wasp Freeze to treat those directly as well. It is best to apply any insecticides in the early morning or evening when the wasps/bees/hornets are least active.
Yes, Talstar P can be used in either a mist blower or a pump sprayer.
Talstar P is mixed at the rate of 0.5 to 1.0 fl oz per gallon of water, so a gallon of the Talstar will make about 128 to 256 gallons of solution and will last up to 90 days depending on where it is applied. Each finished gallon of solution covers approx 1000 sq. ft. Inside applications are limited to just cracks and crevices, along baseboards etc. Outside you would apply 2 to 3 feet up and out around the home, around window and door frames, and other potential entry points. You can choose to spray the lawn for further protection or just around the perimeter. Please refer to the product label for complete instructions on any target pest.
Talstar P can be tank mixed as long as both product labels are followed for rates. Talstar is a great product to use for beetles, just avoid spraying the blooms to prevent burning/harm.
For roach control using Talstar P, we would recommend using the higher rate of 1 oz. of Talstar P per gallon of water. Keep in mind that you should not rely on a spray like Talstar P as the only product you are using to eliminate a roach infestation. We also recommend using a roach bait gel and an Insect Growth Regulator (IGR) for the most complete roach control. We sell these items together in our Roach Control Kits. Please take a few moments to review our online Roach Treatment Guide for more tips.
Talstar P is safe if applied and dried prior to children entering the treated surfaces. If the treated area gets wet again, it does not reactivate the product.
Talstar P is labeled to treat for termites and lasts for about 5 years in the ground and works as a repellent, killing only those insects that come into contact with the treated area. A better option for subterranean termites non repellent termiticide such as Termidor SC or Dominion 2L. Termidor will last up to to 10 years in the soil and Dominion 2L will last 5-7 years. Non repellents work slower but much more effectively when treating a termite colony as they are able to be transferred thorought the entire colony therefore eventually elimating the colony. Talstar P will only repel the termites, not kill the entire colony.
Yes, Talstar P is toxic to honey bees. We recommend to avoid blooming plants and/or treat early in the morning or late in the evening when beneficial insects are not active.
Yes. Fish and aquatic invertebrates share many of the same biological characteristics as insects making them susceptible to insecticides. Talstar P's product label has these precautions:
"This pesticide is extremely toxic to fish and aquatic invertebrates. Do not apply directly to water, to areas where surface water is present or to intertidal areas below the mean high water mark. Drift and run-off from treated areas may be hazardous to aquatic organisms in neighboring areas. Do not contaminate water when disposing of equipment washwaters. Care should be used when spraying to avoid fish and reptile pets in/around ornamental ponds"
Use a 0.06% dilution of Talstar P (1 fluid oz. per gallon of water) for bedbug control. A thorough application should be made to crack and crevices where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers and clothes closets and carpet edges,high and low wall moldings and wallpaper edges. Do not use this product on bed linens, pillows, mattresses or clothes. Remove all clothes and other articles from dressers or clothes closets before application. Allow all treated areas to thoroughly dry before use. Not recommended for use as sole protection against bedbugs. If evidence of bedbugs is found in/on mattresses, use products approved for this use such as Bedlam aerosol and Protect-A-Bed mattress, boxspring and pillow encasements
