We recommend to wait at least two weeks to apply Talstar P (Talstar One) where Spectracide may have been applied.
Talstar is not labeled for application to carpet and is not recommended for indoor flea control because it is restricted to cracks and crevices only indoors. Ultracide would be a much better choice for indoor flea control. It is our recommendation and industry standard that you vacuum immediately before the application of Ultracide and every day or every other day after the application for the next two weeks. Vacuums can physically remove a decent percentage of flea eggs that are in the carpet, along with much of the organic crud that the flea larvae feed on. The vacuum will also stimulate the flea adults still in their pupa form to quickly emerge as the adult, and at this point perhaps be sucked up in the vacuum or exposed to the Ultraicde application. After two weeks most infestations require that you do a second application of the Ultracide and continue with the vacuuming. You should use a product that is registered to use on your pets for fleas such as Frontline or Advantage. TalstarP can be used effectively outdoors for places where your pets may frequent and also moist shady areas where fleas are likely to develop. Treating outdoors will help prevent your pets from re-infesting your home.
Talstar P (Talstar One) is not labeled to be applied to furniture and it should not apply it to children's toys. Per the product label, Talstar is harmful if swallowed, inhaled or absorbed through skin.
Talstar P (Talstar One) rate is 0.5 to 1.0 fl oz per gallon of water. For smaller amounts of water such as a quart you would just use ¼ of that. It must be applied in a pump sprayer to be used correctly not a trigger sprayer like a 409/Windex bottle.
Talstar works great for mosquito control. The key is to apply it to all shrubs, trees, and other foliage around the house or where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out during the heat of the day. Talstar should be applied every 30 days for optimum control. When treating for mosquitoes we also recommend the use of an IGR like Tekko Pro. Tekko Pro IGR contains the active ingredient Pyridine that imitates a growth hormone and prevents full develop in immature mosquitoes.
Yes, Clearys 3336F and Talstar P can be applied at the same time as long as the instructions on both product labels are followed.
Talstar P is a great choice for general pest control. This a non-staining, clear-drying, odorless insecticide that can be used both indoors and outdoors. It is labeled for over 75 different pests.
For most applications, Talstar P is mixed at the rate of 1 oz. to 1 gallon of water. Please see the product label for complete application instructions..
Talstar P is mixed at one ounce per gallon of water for ticks and various types of insects. Please see our Tick Treatment Guide for more tips on how to manage this pest.
Glueboards would not be used outside as they are made with cardboard and glue that would not hold up to the eliminates. Instead they would be used inside for monitoring and trapping and you can use a residual product such as Talstar P around the perimeter of the home for general pest control.
Talstar P (Talstar One) is labeled for gnat control. Be sure you are mixing at 1oz per gallon water. Are you seeing them indoors? If so, be sure to take any indoor plants out and let them dry. If having an issue outdoors, be sure you are focusing on areas that contain moisture and/or shade. Also, undersides of leaves on non-edible trees and shrubs. Keep in mind that part of the difficulty in handling flying insects is that you are relying on them to land on areas treated with the insecticide.
Talstar P is not labeled for lice. We do not carry any products that can be used on humans to control lice, but you can find products that can be used to treat the home here. You may also want to look over our article on How To Kill Head Lice for more information on treating the home.
Talstar P (Talstar One) can be shipped to Detroit, Michgan. Unfortunately, we do not ship outside of the US, so we are not sure if you can enter Canada with this product.
When using Talstar P for ticks in the lawn, the rate is 0.5 - 1.0 oz. per 1000 sq. ft. in at least 1 gallon of water. So for 200 gallons, you would use 100-200 oz. Treat the entire area where exposure to ticks may occur. Use higher spray volumes when treating areas with dense ground cover or heavy leaf litter. Ticks may be reintroduced from surrounding areas on host animals. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed activity. Limit repeat application to no more than once per seven days
Talstar P is not really labeled for use in cars. We would recommend using something like D Force Aerosol instead.
Talstar P is not specifically labeled for Orius or Pirte Bugs. Please provide the targeted area for an alternate recommendation. Thank you!
Talstar P is not labeled to treat TPPD. We recommend that you consult with your local cooperative extension office for recommendations on what would be appropriate to apply. You can also find a great article here that might help.
Our most popular general use product is called Talstar. It is labeled for over 75 different pests, can be used indoors and outdoors, and is pet safe if used as directed.
Talstar works great for mosquito control and it can be used in your mister. The key is to apply it to all shrubs, trees, and other foliage around the house or where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out during the heat of the day. Talstar should be applied every 30 days for optimum control.
The mixing ratio for mosquitoes is 1 fl oz per gallon of water.The key is to apply the Talstar P it to all shrubs, trees, and other foliage around the house or where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out during the heat of the day. Talstar P should be applied every 30 days for optimum control. Please see our Mosquito Treatment Guide for more tips.
