Talstar P (Talstar One) can be applied in direct sunlight. Please keep in mind we recommend to apply Talstar P (Talstar One) in the cooler times of the day, early morning or late evening.
Unfortunately, Talstar P is not labeled to be used on edible vegetables. Please click the link below for a list of products that can be applied to edibles.
We recommend applying Talstar anytime of the day EXCEPT during the middle of the day. The key with mosquitoes is to apply to the underside of the leaves as that is where the adults lay during the day.
All of the surfaces that were incorrectly sprayed will need to be thoroughly washed with soap and water to remove the product. After the areas have been washed they will be safe to use again.
Talstar P will kill camel crickets. Apply Talstar P as a crack and crevice or spot spray to areas where pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas. Do not use as a space spray. Pay particular attention to cracks and crevices. We recommend treating the outside perimeter to help stop insect pests from coming indoors to start with. Apply Talstar P to a band of soil and vegetation 6 to 10 feet wide around and adjacent to the structure. Also, treat the foundation of the structure to a height of 2 to 3 feet.
Yes, Talstar P can be used when the chickens are not in the coop. Once the product has dried completely, it is safe for them to return to the area. This is generally between 2-3 hours.
No, using Talstar as a perimeter spray 3ft up and 3ft out from the home will not affect the Termidor SC as long as the Termidor has had time to bond to the soil after 24 hours. Mix Talstar at 1oz per gallon of water and apply over 1,000 sq ft.
Per the Talstar P label, when applying mixed solution, the applicator needs to wear shirt, shoes, socks, pants and waterproof gloves. If applying in a non-ventilated area, applicator will need to wear a resperatory mask. You may look at our Basic Safety Kit for the necessary protective gear.
Talstar P (Talstar One) dries within approx. 2 hours. After that rain will not wash it away for at least 2-3 months.
While we do not recommend to apply Talstar P (Talstar One) at a higher rate than 1oz, your lawn should be just fine. Please keep in mind that it's also recommended to apply during cooler times of the day.
You should only apply surfactants and spreader stickers with Talstar P for exterior applications only.
Yes, Talstar P will be a great choice for treating listed areas for Japanese Beetles. You will mix 1 oz per gallon per 1,000 sq ft.
No, Talstar P cannot be applied on animals for flea dipping. It is only labeled for outdoor applications for flea control in the lawn. We do carry products that you can apply to your dogs safely for flea control. Please take a few moments to review our treatment article on How to Get Rid of Fleas for more information on flea eradication.
Talstar P (Talstar One) when applied per label is safe to use on grass where a septic is under the soil. Be sure to apply at least 5-10 feet away from the the well.
You can use Talstar P in your attic in all of the cracks and crevices for insect control. If you have a lot of exposed electrical elements though you would want to just use the Delta Dust in these areas as it will last a lot longer than liquid insecticides and they can be used around the electrical elements without worry of shock or shorting out the device.
Talstar P is labeled for ticks, however we would recommend you use our Outdoor/Indoor Flea and Tick Kit for the issue that you are asking about. This kit would include everything that is needed to treat both indoors and outdoors for a ticks infestation.
Please see out Treatment Guide for more information on how to get rid of ticks.
Talstar P is labeled for some borers in trees. Be sure to apply to tree trunks, stems and twigs and plant foliage for the best coverage. The mixing ratio is .25-.5 fl. oz. per gallon of water.