30-30 Mosquito Fly & Gnat Control - Questions & Answers

Displaying 1 to 5 (of 5 questions)
Sort:
  • Asked by Amanda from Pasadena, Tx
    09/29/2014
    Q
    What kind of respirator filter should I use with CSI 30-30 Mosquito, Fly & Gnat Control?
    A
    We would recommend using the Comfo Classic Respirator Mask with P100 Cartridges when using the CSI 30-30 Mosquito, Fly & Gnat Control. It will filter 99.97% of aerosols, fogging solutions, and dusts. It is good for 6 hours of air movement. If you use it for 30 minutes or an hour, we recommend storing it in an air tight container or Ziploc bag, and then you can use as often as you need to for up to 6 total hours.  It can be broken down in increments as long as you store it in an air tight container between uses.
    Was this answer helpful to you?   Yes No
    2 of 3 people found this answer helpful.
  • Asked by Brooks
    07/02/2018
    Q
    What kind of residual can you expect with the CSI 30-30 Mosquito, Fly & Gnat Control?
    A

    The CSI 30-30 Mosquito, Fly &Gnat Control is more of a contact kill only and that is the standard with fogging.  It can make an area slightly repellent for maybe 2-3 days but will not kill anything once it has dispersed/dried on surfaces.

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Johnnyrocket from South Carolina
    04/24/2017
    Q
    Is CSI 30-30 Mosquito, Fly & Gnat Control labeled for use in residential misting systems?
    A

    CSI 30-30 Mosquito, Fly & Gnat Control is not recommended for use in outdoor residential misting systems. We do have a variety of products that are labeled for residential misting systems, which you can find on our website here

    Was this answer helpful to you?   Yes No
    0 of 2 people found this answer helpful.
  • Asked by Tom from Stamford, Ct
    08/01/2017
    Q
    How much water do I mix with CSI-30-30 for use in a Vector fog machine?
    A

    CSI 30-30 Mosquito, Fly & Gnat Control  should be mixed with mineral oil or used undiluted. The rate is 1 part product to 14 parts oil.

    Was this answer helpful to you?   Yes No
    0 of 2 people found this answer helpful.
  • Asked by Dave from Lakefield, Mn
    06/18/2018
    Q
    We purchased a Vectorfog H500, what insecticide can you recommend for bug control in that unit?
    We would like to cover an area of 8 acres to control mostly flying insects (Minnesota mosquitos). The acreage consists of trees, houses, flowers & gardens. Want to know what you have to purchase that can be used in the groves and on the yards, and if you would use the water base or oil base solutions. From what I can tell the oil base travels the furthest. Would there be any long lasting spray or is it all contact? or can one mix both? Any information or charts would be appreciated. Thanks
    A

    CSI 30-30 Mosquito, Fly & Gnat Control would be used in the VectorFog H500.  It is more of a contact kill only and that is the standard with fogging.  It can make an area slightly repellent for maybe 2-3 days but will not kill anything once it has dispersed/dried on surfaces.

    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
Displaying 1 to 5 (of 5 questions)