AB Aquashade Dye - Questions & Answers

Displaying 1 to 3 (of 3 questions)
Sort:
  • Asked by Loretta from Cleveland Oh
    08/12/2018
    Q
    Can AB Aquashade Dye be used in spraying water fountains near residential apartments safely?
    A

    No, AB Aquashade Dye is only labeled for use in ponds or lakes.  It is not to be used in water fountains.

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Roy from Saints Martyrs Des Canadiens
    09/01/2019
    Q
    What is the application rate for AB Aquashade Dye?
    A

    To calculate the application rate of AB Aquashade Dye, please do the following:

    1. Calculate total volume of your water body into Gallons (Liters) or Acre-Feet (Cubic Meters):

    • Length (ft.) x Width (ft.) x Avg. Depth (ft.) x 7.5 = Gallons
      Length (ft.) x Width (ft.) x Avg. Depth (ft.) / 43,560 = Acre-Feet

    Avg. Depth can be determined by taking a number of depth readings and calculating the average or estimated as 1/2 the maximum depth in evenly contoured bodies of water.

    2. Based upon water volume, determine dosage rate from the chart below.

    3. Apply in season maintenance dosages, as needed, to restore loss of color due to dilution or dye degradation.

    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
  • Asked by Sharon from Benton, Illinois
    02/24/2023
    Q
    Should I leave on or turn off my pond fountain before applying?
    Turn off or leave fountain on in the pond before applying Aquashade?
    A
    You can leave the fountain on when applying AB Aquashade Dye as long as the water is only circulating in the pond.
    Was this answer helpful to you?   Yes No
Displaying 1 to 3 (of 3 questions)