Alligare Triclopyr 4 Herbicide - 2.5 gal. Help - Questions and Answers

Alligare Triclopyr 4 Herbicide - 2.5 gal.

Customer Q&A

Alligare Triclopyr 4 Herbicide - 2.5 gal.

(12)

Free Shipping

Info / Buy Now

Ask Question

Asked by Mary from Chicago Illinois

10/09/2022

Q

Is a surfactant required to be used with Alligare Triclopyr 4 Herbicide?

A

According to the product label, a surfactant is not required to be used with Alligare Triclopyr 4 Herbicide - 2.5 gal. however it does state that the use of a surfactant will help the Triclopyr adhere and absorb better into the weeds.

Was this answer helpful to you? Yes No

19 of 21 people found this answer helpful.
Asked by Altony from Charlotte, Nc

03/03/2021

Q

Is there any difference between Alligare Triclopyr 4 and Hi-Yield Triclopyr Ester other than brand?

A

Alligare Triclopyr 4 and Hi-Yield Turflon Ester Ultra both contain the active ingredient of Triclopyr 61.6% and treat for majority of the same weeds. The main differences will be where they can be approved application sites. Hi-Yield Turflon Ester Ultra is labeled to be used Perennial Cool …
Read Full Answer »
Alligare Triclopyr 4 and Hi-Yield Turflon Ester Ultra both contain the active ingredient of Triclopyr 61.6% and treat for majority of the same weeds. The main differences will be where they can be approved application sites. Hi-Yield Turflon Ester Ultra is labeled to be used Perennial Cool Season grasses, Bluegrass, Ryegrass, or Tall Fescue (including sod farms, commercial turf, and golf courses). As surfactant is ONLY recommended when treating brush, vines, or woody weeds. DO NOT use a surfactant when treating lawns. Please view the product label HERE for more information.

Alligare Triclopyr 4 would be suggested for treating unwanted woody plants and annual and perennial broadleaf weeds in non residential areas such as forests, on permanent grass pastures, rangelands, conservation reservation programs, non-crop areas including industrial manufacturing and storage sites, fence rows, right-ot-ways, non-irrigation ditch banks, around farm houses. Application sites for Alligare Triclopyr also include perennial cool season grasses, bluegrass, ryegrass and tall fescue ornamental turf (including sod farms, commercial turf, and golf courses). Please view the product label HERE for more information.

Was this answer helpful to you? Yes No

10 of 18 people found this answer helpful.
Asked by Kim from Columbus, Oh

06/26/2022

Q

How long after applying Alligare Triclopyr 4 Herbicide is the application rainfast?
It rained about 10 hours after I applied TRICLOPYR 4 on the lawn. Will the product be effective, or is 10 hours too little time before rain fall for the product to work? What is the minimum number of hours after which rain won't hinder effectiveness?

A

Alligare Triclopyr 4 Herbicide is rainfast after 4-6 hours. While it is typically best to allow 24 hrs before rainfall is expected after applying a herbicide like Alligare Triclopyr 4 Herbicide, as long as the application has had enough time to completely dried it should not affect the results.

Was this answer helpful to you? Yes No

9 of 10 people found this answer helpful.
Asked by Ronald from Arco Idaho

05/08/2019

Q

How much Alligare Triclopyr 4 do I need per gallon of water?

A

The mix rate for Alligare Triclopyr 4 vary depending on what and where you area treating. Please refer to the product label for specific application instructions.

Was this answer helpful to you? Yes No

8 of 414 people found this answer helpful.
Asked by Dawn from Indian Harbour Beach, Fl

05/01/2021

Q

Can I use Alligare Triclopyr 4 Herbicide on St. Augustine grass for wedelia control?

A

Alligare Triclopyr 4 cannot be used on St Augustine at all nor is it labeled for use on residential turfgrass.

Was this answer helpful to you? Yes No

8 of 9 people found this answer helpful.
Asked by Stephen from Casey

09/20/2020

Q

Is Alligare Triclopyr 4 Herbicide - 2.5 gal. harmful to pets?

A

Alligare Triclopyr 4 Herbicide - 2.5 gal. is safe for animals if used as directed. Keep animals out of the area during application and until all surfaces are dry. It is fine for them to return to the area once it is dry. Please keep in mind that this product is not for use in residential areas…
Read Full Answer »
Alligare Triclopyr 4 Herbicide - 2.5 gal. is safe for animals if used as directed. Keep animals out of the area during application and until all surfaces are dry. It is fine for them to return to the area once it is dry. Please keep in mind that this product is not for use in residential areas. Please let us know if you need a recommendation for a product that is safe for your application.

Was this answer helpful to you? Yes No

7 of 7 people found this answer helpful.
Asked by Shane

04/06/2021

Q

Will Alligare Triclopyr 4 Herbicide damage my full grown Weeping Willow and Maple Tree?

A

Alligare Triclopyr 4 Herbicide is harmful to trees if applied to the root zone or any exposed roots.

Was this answer helpful to you? Yes No

4 of 4 people found this answer helpful.
Asked by Mike from Grovespring, Mo, 65662

03/21/2022

Q

What is the rate of Alligare Triclopyr 4 Herbicide per gallon of water for spot spraying Sericea lespedeza?
Mix 3/8 to ¾ fluid ounces of Alligare Triclopyr 4 per 1000 square feet in enough water to provide uniform coverage of the target area and apply at any time broadleaf weeds are susceptible.

A

For spot treatments with Alligare Triclopyr 4 Herbicide, the product label states to mix 3/8 to ¾ fluid ounces of Alligare Triclopyr 4 per in enough water to provide uniform coverage of a 1000 square feet area and apply at any time broadleaf weeds are susceptible. Note: The water is only act…
Read Full Answer »
For spot treatments with Alligare Triclopyr 4 Herbicide, the product label states to mix 3/8 to ¾ fluid ounces of Alligare Triclopyr 4 per in enough water to provide uniform coverage of a 1000 square feet area and apply at any time broadleaf weeds are susceptible. Note: The water is only acting as the carrier therefore if it takes 1 gallon or 2 gallons of water to cover the 1000 sq ft does not matter, as long as you are able to have uniform coverage.

Was this answer helpful to you? Yes No

4 of 7 people found this answer helpful.
Asked by Anthony from Neptune, Nj

03/27/2024

Q

Looking to spot treat oxalis in lawn, can I use Alligare Triclopyr 4 Herbicide?
I want to spot treat areas of oxalis in my bluegrass lawn with a 1 gal pump sprayer. What is recommended mix ratio to do this without killing grass near by

A

Alligare Triclopyr 4 Herbicide is not for use in residential areas. For oxalis in bluegrass lawn, we recommend TZone SE Herbicide.

Was this answer helpful to you? Yes No

3 of 4 people found this answer helpful.
Asked by Brian from Winston-salem

07/26/2022

Q

Can triclopyr be used to kill bermudagrass and bahiagrass in a TTF lawn?
I have several customers with tall fescue lawns that are infested with bahiagrass and some bermudagrass. Since the label for triclopyr says it shouldn't be sprayed on bahiagrass or bermudagrass does that mean that it will kill it?

A

The label states to not apply Alligare Triclopyr 4 Herbicide - 2.5 gal. to Bermudagrass or Bahia unless injury can be tolerated. These grasses are sensitive to this product, and there is a high chance injury/killing it.

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by Wesley

07/16/2022

Q

Can I use Alligare Triclopyr 4 Herbic 2.5 as a replacement for Turflon Ester?

A

Depending on the application site you are treating, there are some alternatives for Turflon Ester Ultra which is labeled to be used on perennial bluegrass, perennial ryegrass, or tall fescue ornamental turf including these turfgrasses in sod farms and golf courses. Alligare Triclopyr 4 is la…
Read Full Answer »
Depending on the application site you are treating, there are some alternatives for Turflon Ester Ultra which is labeled to be used on perennial bluegrass, perennial ryegrass, or tall fescue ornamental turf including these turfgrasses in sod farms and golf courses. Alligare Triclopyr 4 is labeled to be used in rangeland, forests, grass pastures, industrial manufacturing and storage sites, fence rows, rights-of-way, ornamental turf, non-crop areas around the farm, grazing areas and establishment, and maintenance of wildlife openings. HI-YIELD Turflon Ester Ultra can be applied to established lawns but not range and pasture areas.

Was this answer helpful to you? Yes No
Asked by Cindy from Lake City

07/21/2022

Q

What is the rate of Alligare Triclopyr 4 Herbicide for poison ivy vines in a pump sprayer? How long to apply before rainfall is expected?

A

Alligare Triclopyr 4 Herbicide can be used to control susceptible vines with less than 2 inch diameter stems. This product is intended for larger scale applications such as forests, grass pastures, rangeland, non-crop areas, ornamental turf, industrial sites and ditchbanks. The application rate is 4…
Read Full Answer »
Alligare Triclopyr 4 Herbicide can be used to control susceptible vines with less than 2 inch diameter stems. This product is intended for larger scale applications such as forests, grass pastures, rangeland, non-crop areas, ornamental turf, industrial sites and ditchbanks. The application rate is 4 to 8 quarts of Alligare Triclopyr 4 in 2 to 3 gallons of crop oil concentrate or other recommended oil. You then, add this mixture to enough water to make 100 gallons of spray solution. Continuous agitation is needed to maintain mix and apply 70 to 100 gallons per acre. View more information on the product label. For smaller applications or for treating home lawns, Bonide Poison Ivy and Brush Killer BK-32 Concentrate is labeled for poison ivy at the rate of 2 fl oz to 4 fl oz per 1000 sq ft depending on if you have Northern or Southern turfgrass. View the full product label for more complete information. Applications should be made when no rainfall is expected within 24 hrs.

Was this answer helpful to you? Yes No
Asked by Longbow1 from Dubuque, Ia

02/05/2025

Q

How much Alligare Triclopyr 4 should be mixed with 1 gal of diesel fuel for basal bark treatments?

A

Basal Bark Treatment - To control susceptible woody plants with stems less than 6 inches
in basal diameter, mix 1 to 5 gallons of Alligare Triclopyr 4 in enough oil to make 100 gallons (this is roughly 6.4oz mixed with 1 gallon) of spray solution Apply with knapsack sprayer or power spraying equipm
…
Read Full Answer »
Basal Bark Treatment - To control susceptible woody plants with stems less than 6 inches
in basal diameter, mix 1 to 5 gallons of Alligare Triclopyr 4 in enough oil to make 100 gallons (this is roughly 6.4oz mixed with 1 gallon) of spray solution Apply with knapsack sprayer or power spraying equipment using low
pressure (20-40 PSI) Spray the basal parts of brush and tree trunks to a height of 12 to 15
inches from the ground Thorough wetting is necessary for good control Spray until runoff
at the ground line is noticeable Old or rough bark requires more spray than smooth young
bark Apply at any time, including the winter months, except when snow or water prevents
spraying to the ground line.
Low Volume Basal Bark Treatment - To control susceptible woody plants with stems less
than 6 inches in basal diameter, mix 20 to 30 gallons of Alligare Triclopyr 4 in enough oil to
make 100 gallons of spray solution Apply with a back pack or knapsack sprayer using low
pressure and a solid cone or flat fan nozzle. Spray the basal parts of brush and tree trunks
in a manner which thoroughly wets the lower stems, including the root collar area, but not to
the point of runoff Herbicide concentration should vary with size and susceptibility of species
treated Apply at any time, including the winter months, except when snow or water prevents
spraying to the ground line or when stem surfaces are saturated with water

detailed instructions can be found on page 4 of the product label.

Was this answer helpful to you? Yes No

0 of 2 people found this answer helpful.