Yes, per the label Acelepryn G Insecticide can be applied from early April to early September for preventative and early curative control of all the major white grub species.
We don't have the exact spreader setting for your model spreader. The easiest way to determine the correct setting for your needs is outlined below:
If you need to use 3lbs of product per 1,000 sq ft you would add 3 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft). If you have product left, your setting is too low. If you run out of product, your setting is too high. Typically if you walk at a normal pace and set the spreader at the middle setting, that is usually the right amount per 1000 square feet.
Yes, Acelepryn G Insecticide needs to be watered in after application. According to the product label, you want to irrigate turf immediately after application or allow rainfall to move the product into the soil.
When using Acelepryn G Insecticide there is a varying application rate of 1.15 - 2.3 lb per 1000 sq ft depending on what pest you are treating. Also the timing of treatment would depend on the pest as well. Please see the product label for appplication timing and Table 1: Turfgrass Application Rates to be sure you are treating at the right time. You can also contact you local Extension Office as well for the correct timing in your specific area.
The rate of Acelepryn G Insecticide depends on the insect you are targeting. Per the rate table on page 4 of the product label, you will apply 1.15 lbs to 2.3 lbs per 1,000 sq ft. The 25lb bag will cover 10,000 to 21,000 sq ft.
Acelepryn G Insecticide is labeled as a systemic insecticide.
The length of time an application of Acelepryn G Insecticide lasts will be based on the insect you are treating, the time of treatment and the rate the product is applied at. Please refer to the product label for specific rates and application timing.
For the best timing on when to apply Acelepryn G Insecticide to prevent armyworms in your specific region, we would suggest contacting your local cooperative extension office to speak with your Master Gardener.
Per the product label, Acelepryn G Insecticide can be applied from early April to early September for preventative and early curative control of all the major white grub species.
Acelepryn G Insecticide can be applied as directed to turfgrass for insect control without harming the turf.
Acelepryn G Insecticide is not labeled for ants. Please take a look at our Ant Treatment Guide for some products we recommend to control ants.
All pets should be kept out of the area while applying Acelepryn G Insecticide and until the granules have been watered in and the application has completely dried. Please view the product label and apply as directed.
Acelepryn G Insecticide can be applied in ornamental landscapes but needs to make contact with the soil to be effective. You should rake back the mulch if possible before application and push back over after watering in and the area has dried.
How often Acelepryn G Insecticide should be applied will depend on the target pest per label, wait a minimum of 7 days to retreat and do not apply more than 250 lbs per acre per year in broadcast applications to turfgrass.
Yes, you may seed at the same time when using Acelepryn G Insecticide
Acelepryn G Insecticide being an insecticide would not interfere or cause injury to newly seeded turfgrass. Apply as directed per the product label.
