Yes, Azoxy 2SC Select fungicide and Propiconazole 14.3 can safely be mixed together. Depending on the fungus being treating when rotating to another product be sure to use a product in a different group (not group 3 or 11) like Clearys 3336F Fungicide, which is a group 1 fungicide.
We would recommend that you do not mow within 2 days of your application of Azoxy 2SC Select or other fungicides, insecticides, or herbicides. There are no restrictions on timing with fertilizers, however, per the product label, it is not recommend to tank mix Azoxy 2SC with insecticides, fertilizers, adjuvants, etc.
It is best to apply the Azoxy 2SC Select when you are not expecting rainfall or irrigation within 24-48 hours of the application. Please refer to the product label for complete application instructions for the disease you are targeting.
The rates varies depending on what disease you are treating. You would mix Azoxy 2SC Select with the required amount of water and apply as a dilute spray application in 2-4 gallons of water per 1,000 square feet (87-174 gallons per acre). Repeat applications at specified intervals for as long as required.
Yes, Azoxy 2SC Select is labeled to be applied to ornamentals and turf as directed on the product label.
When applying Azoxy 2SC Select to turf grass, you will not need a surfactant unless you are treating for dollarspot. For soil borne diseases that would affect turf grass, the fungicide needs to make contact with the soil so it can go into the roots of the grass. If you use a surfactant, it will stick the fungicide to the grass blades and will not make the required contact with the soil. Using a surfactant would only be beneficial for air borne diseases that typically do not affect turf grass.
Yes, Azoxy 2SC Select can be applied to newly seeded or established turf.
Pythium root rot will flourish in wet soil conditions, so if you know there are areas that tend to flood, then it would be best to address the grading and/or soil in those areas for long-term control. Fungicides are best applied preventatively for this disease. Azoxy 2SC Select is one of our most popular choices for this disease. This article from your Florida Extension has excellent details about cultural control of this disease as well. Keep in mind that this disease is naturally present on warm-season grass roots.
Azoxy 2SC Select Fungicide is applied at 0.38 - 0.77 fl oz in 2-4 gallons per 1,000 sq ft. We recommend marking off 1,000 sq ft of turf and apply water first to determine the volume of water needed for the area for uniform coverage.
Azoxy 2SC Select Fungicide is most effective when applied prior to disease development as diseases are easier to prevent than control. It can be used a curative as directed on the label
Azoxy 2SC Select would be a great option to treat pythium root rot. You will apply 0.38-0.77 fl oz per 1,000 sq ft. Begin applications before disease is present. During periods of prolonged favorable conditions, treat at the 10-day application intervals.
It is not recommended to tank mix Azoxy 2SC Select with herbicides or fertilizers per the product label, but you can apply one right after the other.
The state of AR has made this restriction. They do not allow us to ship Azoxy 2SC Select to non-licensed individuals.
While a hose end sprayer is not recommended for applications where you need to be specific in how much chemical is being spread over a certain amount of area to work correctly, it can be done if that is the only option. The requirement for your hose end sprayer is that it has a dial that you can select the mix rate for, and that the settings on that dial go low or high enough for the use rate given on the product label, next to the disease name you are trying to control. As long as those parameters apply, you can use the Azoxy 2SC Select Fungicide in that unit.
According to the product label you will want to apply Azoxy 2SC Select Fungicide at a rate of .38 oz to .77 oz per 1,000 sqft. Since water acts as the carrier to distribute the fungicide, the amount of water you use will be based on how much water it takes for you to evenly and thoroughly cover a 1000 sq ft area. We recommend doing a mock test with plain water first to determine how much water you need for 1000 sq ft. Please view our How to Calibrate Your Sprayer Video for instructions on how to do this if needed.
Azoxy 2SC Select contains the active ingredient Azoxystrobin which is a Strobilurin Fungicide. It is only labeled/intended to be used a fungicide and there is no information or proof that it would act as a steriod to increase plant growth.
After Azoxy 2SC Select Fungicide has been applied, you should be able to resume a normal watering schedule after 24 hours, as the product should be rain-fast at that point. Keep in mind that many diseases that require a fungicide for treatment are sometimes related to excess moisture, so it is advisable not overwater, to avoid encouraging disease development.
Yes, Azoxy 2SC Select can be applied to established St. Augustine turf.
It is best to apply the Azoxy 2SC Select when you are not expecting rainfall or irrigation within 48 hours of the application. Please refer to the product label for complete application instructions for the specific disease you are targeting and use sufficent water at the time of application.
The Azoxy 2SC Select Fungicide is safe to apply with a humic product, we just recommend doing a tank mix jar test first for compatibility and then you can safely begin treating.
