How does it work? BAC-AZAP is a professional bio-sanitation product that uses a unique blend of active live bacteria and enzymes that consume and do away with decaying organic odor-causing matter. (Newer odors are more easily done away with than “older” odors that have been around awhile, which may require several treatments.) BAC-AZAP is also non-toxic, biodegradable, non-pathogenic, non-caustic and salmonella free.

DIRECTIONS FOR USE: BAC-AZAP is furnished full strength and ready to use for the toughest applications. In cases where the product is applied periodically as part of an ongoing maintenance program, the product may be diluted with one (1) or two (2) parts water in order to maximize coverage.

FOAMING: BAC-AZAP may be applied as a foam using an applicator device designed to create foam solutions. Place BAC-AZAP into the applicator at one hundred (100)% concentration, do not dilute. BAC-AZAP is specially formulated to be used in conjunction with ProFoam Platinum foam concentrate and may be applied as a foam into drain lines, to organic debris under heavy kitchen equipment, into wall voids where organic materials or dead rodents may cause odor concerns and onto walls of garbage cans and dumpsters.

FOGGING: Bac-Azap may also be fogged into confined areas, such as crawl spaces or attics using a fogging device. Dilute product two (2) parts water to one (1) part BAC-AZAP (2:1) and apply as a fog at a rate of one (1) gallon of mixed solution per one thousand (1000) cubic feet of confined space. NOTE: Do not fog BAC-AZAP into areas where people or pets are present. Wait until fog has dissipated before re-entry.

DRAIN FLY HABITATS: For best results, apply product at end of day for overnight action on habitats and breeding sites. If drains are not used regularly, pour two (2) to three (3) gallons of warm water into drain opening to moisten drain surfaces before treatment.

Apply four (4) to six (6) ounces to each drain where drain fly activity is present. Continue daily for five (5) to ten (10) days.

Maintenance for drain flies: Apply four (4) to six (6) ounces one (1) to two (2) times per week.

PHORID & FRUIT FLY HABITATS: For best results, apply product at end of day for overnight action on habitats and breeding sites. Use as a wash on all floors where food or other contamination may be used as food sources and breeding sites. In sewage overflow or pipe breakage situations, soak affected areas after removal of contaminants.

WALL VOIDS: BAC-AZAP can be applied into wall voids or other inaccessible areas by spray injection or in conjunction with a foam applicator.

CRAWL SPACES & BASEMENTS: Spray onto surfaces or dirt in crawl spaces, that may produce or retain odors from mold, mildew, sewage, wildlife and pets. Apply at the rate of one (1) quart of solution per one hundred (100) square feet.  Bac-A-Zap can also be fogged in crawl spaces and basements using a fogging machine (see FOGGING above).

WALLS, FLOORS & CARPETS: Begin by thoroughly cleaning areas with appropriate materials and methods. Spray BAC-AZAP on all surfaces where odors might originate including wall surfaces, floors and carpets. Apply at the rate of one (1) quart per one hundred (100) square feet of surface area (approximately three (3) fluid ounces per square yd.). NOTE: Although BAC-AZAP is designed to be non-staining, always test surface for colorfastness in an inconspicuous area before treating entire surface.

COMPOSTING: Mix six (6) to eight (8) ounces BAC-AZAP to one (1) gallon water. Pour evenly over compost pile two (2) times per week. The solution can treat up to 50 cubic feet of compost. For best results, turn and mix compost pile while adding the BAC-AZAP solution. To speed up the composting process, make 1 gallon solution of water-soluble fertilizer and add 8 ounces BAC-AZAP. Pour over compost pile as described above.

REFUSE CONTAINERS, GARBAGE CANS & DUMPSTERS: Once unit is empty, rinse with water and liberally spray surfaces with BAC-AZAP. If unit cannot be rinsed with water each time it is emptied, attempt to rinse with water daily or on a regular basis to remove excess soils. Apply BAC-AZAP to the unit as often as possible, to the point of surface wetness to control odors and remove pest habitats.

BATHROOMS & FLOOR DRAINS: After cleaning, spray walls and fixtures with a one to one (1:1) or two to one (2:1) dilution of BAC-AZAP to prevent lingering odors. Pour three (3) to four (4) fluid ounces of undiluted BAC-AZAP directly into floor drains and urinals at the end of the day and allow to work overnight.

Storm and Water Damage Steps

STEP 1: Remove debris and clean area.

STEP 2: Apply according to label application instructions directly to source of odor and its surrounding areas. Wet areas thoroughly with product.

STEP 3: Allow to work. No rinsing required.

STEP 4: For large areas, dilute 1:1 with water.