B&G Brass Extension 18" - Part VE-155 (22045600) Help - Questions and Answers

B&G Brass Extension 18" - Part VE-155 (22045600)

Customer Q&A

$B&G Brass Extension 18\$

B&G Brass Extension 18" - Part VE-155 (22045600)

(7)

Free Shipping

Info / Buy Now

Ask Question

Asked by Cordell from Albuquerque, Nm

01/10/2017

Q

Does the B&G Brass Extension 18" - Part VE-155 include the valve cable?

A

No, the B&G Brass Extension 18" - VE-155 does not include a valve cable. That would need to be purchased seperately, and you would need to know the specific length needed as there is more than one.

Was this answer helpful to you? Yes No

2 of 2 people found this answer helpful.
Asked by Mike from Atascadero,ca

04/23/2013

Q

My tip broke off, so what do I need to replace and do you have it?
I need a whole new wand I think you call it? The actual hand grip where you squeeze works fine but I need a new wand I guess. I dont see it on your website. For the B and G sprayer, the all silver one.

A

We want to be sure you are purchasing exactly what you need. We recommend that you call B&G and explain what happened and they will give you the part numbers that you need to purchase to fix your sprayer. You can reach B&G by calling 800-544-8811

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by David from Alexandria,in

05/12/2013

Q

I have a 1 Gal.B&G sprayer with the blue pistol grip sprayer assembly on it.Will this wand fit on this type assembly?

A

If you are referring to the blue "Ban-Drip" gun the 18" extension wand will fit it. Keep in mind it doesn't have the tip shut off so indoor applications with this would be discouraged due the possible mess it could make from drips at the tip. If you have further questions feel free to contact B&…
Read Full Answer »
If you are referring to the blue "Ban-Drip" gun the 18" extension wand will fit it. Keep in mind it doesn't have the tip shut off so indoor applications with this would be discouraged due the possible mess it could make from drips at the tip. If you have further questions feel free to contact B&G for troubleshooting at 1-800-544-8811.

Was this answer helpful to you? Yes No

1 of 2 people found this answer helpful.
Asked by Matt from Keller,tx

05/17/2015

Q

I have a sprayer with a 24" extension & want to replace it with an 18"
I ordered an 18" extension but the 24 cable will not fit. Is there another way to retro fit an 18:?

A

There is an 18 inch valve cable that goes along with the B&G 18" extension wand.

Was this answer helpful to you? Yes No

1 of 1 people found this answer helpful.
Asked by Jim

06/05/2011

Q

Hi, I recently purchased a crack and crevice tip (B&G) will that fit this extension or will I need additional
parts, and will it come with proper fittings to hook up to a standard 1 gallon B&G?

A

The 4-way tip or the crack and crevice extension should fit the wand with no issues. All of the parts are made to be interchangeable.

Was this answer helpful to you? Yes No
Asked by Cag

02/23/2021

Q

Is the B&G Brass Extension 18" - Part VE-155 (22045600) compatible with a B&G half gallon sprayer?
B&G half gallon comes with a stock 8-in wand - a little short for indoor use. Using the existing spray trigger assembly, would this extension wand work as a retrofit and would it require any additional parts such as cables? Are any cables included with this?

A

The B&G Brass Extension 18" - Part VE-155 (22045600) is just the wand. You will also need the B&G Valve Cable - 18" - Part VC-153 as well. These will work with a ½ gallon B&G tank sprayer.

Was this answer helpful to you? Yes No