The additional parts that the Birchmeier DR-5 Duster come with are the Injector needle, curved, extension 1 m, telescopic extension 0.5 - 1 m, telescopic extension 1 - 2 m, compressed air connector, and fiber reinforced hose
Yes, the Birchmeier DR 5 Duster comes with a compressed air connector to attach to external pressure sources.
Directions for using: Compressed air: In order to pump up the appliance using an external pressure source a pressure-reducing valve must be used, set to a maximum pressure of 3 bar. When a pressure of 3 bar has been reached the pressure source must be removed.
We apologize but do not currently carry any replacement parts for the Birchmeier DR 5 Duster.
We accept returns on unused products in their original condition. Spray equipment that handles liquid products can have water run through them to test for functionality/defects upon receipt and to ensure it meets a customers spray needs. However if chemical has been run through a device such as a sprayer or duster, we cannot accept a return if the unit does not work for your specific needs. We do however accept returns if the item is defective from the manufacturer and will be happy to troubleshoot with you, get assistance from the manufacturer, and send a prepaid return label for the defective item if needed. You can view our return policy, in full, here.
No, the Birchmeier DR 5 Duster does not require compressed air that would come from using an air compressor. This unit is operated as a normal hand pump sprayer.
Drione Dust should be less likely to clump using the Birchmeier DR 5 Duster due to the psi/power the sprayer provides.
Also, since Drione Dust is not being made by Envu and the production location has changed, reports are showing an improvement with clumping with this dust. In areas where there are high moisture/humidity levels, clumping could still be an issue though.
