Bonide Copper Fungicide - Questions & Answers

Displaying 1 to 20 (of 20 questions)
Sort:
  • Asked by Martie from Poland, Oh
    08/25/2018
    Q
    How do I mix Bonide Liquid Copper Fungicide Concentrate?
    A

    Unless otherwise stated on product label, mix 0.5 to 2.0 fluid ounces of Bonide Liquid Copper Fungicide Concentrate with 1 gallon of water.

    Was this answer helpful to you?   Yes No
    57 of 110 people found this answer helpful.
  • Asked by Larry from Minneapolis Mn
    07/03/2019
    Q
    How much Bonide Copper Fungicide per 2 gallons of water?
    A

    You would dilute 2.5 oz. of Bonide Copper Fungicide per 2 gallons of water. 

    Was this answer helpful to you?   Yes No
    30 of 49 people found this answer helpful.
  • Asked by Dan
    04/27/2016
    Q
    Is Bonide Copper Fungicide a dust or a liquid concentrate?
    A

    Bonide Copper Fungicide comes as dust but has directions to mix with water if you would like to apply as a spray.

    Was this answer helpful to you?   Yes No
    20 of 94 people found this answer helpful.
  • Asked by Cathye from Sturgis, Mi
    10/18/2017
    Q
    How much Bonide Copper Fungicide do I use for a gallon sprayer?
    A

    (Using hand or tank sprayers) – Add proper amount (vary depending treatment) of Bonide Copper Fungicide powder to small amount of water, strain, add remainder of water and spray – agitate sprayer to keep nozzle from plugging. Apply 3 gallons of mixed solution to a small tree or bush, 6 gallons of mixed solution to a medium size tree, or 9 gallons of mixed solution to a large tree. Thoroughly spray upper and lower surfaces of foliage to the point of runoff. Do not overspray. This product is intended for small garden use only.

    Was this answer helpful to you?   Yes No
    10 of 136 people found this answer helpful.
  • Asked by Chuck from Spokane Wa
    06/22/2019
    Q
    Is Bonide Copper Fungicide safe to use on mature azalea plants?
    A

    Yes, Bonide Copper Fungicide can be applied to established azaleas.  Please see the product label for complete application instructions. 

    Was this answer helpful to you?   Yes No
    8 of 15 people found this answer helpful.
  • Asked by John from Ashland Wi 54806
    07/12/2014
    Q
    Bonide Copper Fungicide dust for cabbage in place of Sevin dust
    A
    Bonide Copper Fungicide will treat for disease on plants. Sevin will treat for insects. We do not ssee any way that you could use Bonide Copper in place of Sevin.
    Was this answer helpful to you?   Yes No
    4 of 6 people found this answer helpful.
  • Asked by Richard from Worcester Vt
    09/04/2018
    Q
    How much Bonide Copper Fungicide is needed per gallon of water to treat 1000 sq ft. of grapes?
    A

    For grapes, Bonide Copper Fungicide can be mixed at anywhere from 2-26 ounces of product per gallon to treat 1000 sq. ft., not to exceed 11.9 lb. annually. 

    Was this answer helpful to you?   Yes No
    4 of 16 people found this answer helpful.
  • Asked by Rafael from Ca
    12/11/2018
    Q
    How do I apply Bonide Copper Fungicide?
    A

    The application instructions for Bonide Copper Fungicide can vary depending on where and how you are using it.  Please refer to the product label for specific application instructions. 

    Was this answer helpful to you?   Yes No
    4 of 30 people found this answer helpful.
  • Asked by Tim from Olympia, Washington
    05/12/2013
    Q
    Does Bonide Copper Fungicide contain copper octhanolate. Is it a replacement for phyton 27?
    A
    This product contains 7% copper sulfate. The Bonide Liquid Copper Fungicide is a 10% copper Octanoate. We are not sure what Phyton 27 is as we do not carry this product. We suggest you contact the manufacturer Bonide for further information at 1-800-536-8231.
    Was this answer helpful to you?   Yes No
    4 of 7 people found this answer helpful.
  • Asked by Lynn from Glendale Ri
    07/22/2021
    Q
    How long does the Bonide Copper Fungicide last once mixed in water?
    I mixed 1 ounce in 1 gallon of water but did not use it all. Will the solution last.
    A

    Bonide Copper Fungicide must be used within 24 hours of mixing or discarded.

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Paula from Columbia, Va
    07/02/2021
    Q
    Can Bonide Copper fungicide be mixed with Bonide Dead Bug and sprayed at the same time on tomato plants?
    A

    Yes, two Bonide Copper Fungicide and Bonide's Captain Jacks Dead Bug Concentrate can be combined and used in a hose end sprayer. Be sure to do a small tank test to ensure there is no clumping between the two products. 

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Margaret from Chicago, Il 60618
    11/04/2019
    Q
    How much Bonide Copper Fungicide to use on plant in 6
    A

    Bonide Copper Fungicide is not labeled to be used on containerized plants.  

    Was this answer helpful to you?   Yes No
    2 of 8 people found this answer helpful.
  • Asked by Brigitte from Gates Mills, Oh
    08/09/2021
    Q
    Can mixed solution of Bonide Copper Fungicide be saved and used at a later date?
    A

    Bonide Copper Fungicide should be used within 24 hours once mixed with water.

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Dennis from Dahlonega
    06/01/2021
    Q
    What is the per gallon mix of Bonide Copper Fungicide to water for tomatoes?
    A

    The rate for tomatoes when using Bonide Copper Fungicide is 2-4 1/3 oz in 3 gallons of water per 1000 sq ft. Please read over the label for complete application instructions. 

    Was this answer helpful to you?   Yes No
    1 of 3 people found this answer helpful.
  • Asked by Jim from Bolivar, Ohio
    03/03/2024
    Q
    Can Fruit Tree and Plant Guard be mixed with Bonide Copper Fungicide, both Bonide products.
    Mixing products
    A

    Bonide Copper Fungicide should be made in a separate application as directed from your application of the Fruit Tree and Plant Guard product. 

    Was this answer helpful to you?   Yes No
  • Asked by Patsy from Shreveport, La
    02/24/2024
    Q
    How much of the Bonide Copper Fungicide do I use to spray a fig tree using a 2 gallon sprayer?
    Use for a fig tree
    A

    You would dilute 2.5 oz. of Bonide Copper Fungicide per 2 gallons of water.   Please see the product label for complete application instructions. 

    Was this answer helpful to you?   Yes No
  • Asked by Antonio from Old Bridge, Nj
    06/15/2021
    Q
    If applying as a spray and not a dust, what is the application rate of Bonide Copper Fungicide per gallon of water for grapes?
    A

    Bonide Copper Fungicide can be used as a dust application or liquid spray application. Refer to page 3 of the product label for information on both types of application.

    For grapes, the mix rate is 2 – 26 oz. If applying as a spray mixed with water, you will add the proper amount of powder to small amount of water, strain, add remainder of water and spray – agitate sprayer to keep nozzle from plugging.

    The product label states to use 3 gallons of mixed solution to a small tree or bush, 6 gallons of mixed solution to a medium size tree, or 9 gallons of mixed solution to a large tree. Thoroughly spray upper and lower surfaces of foliage to the point of runoff. Do not overspray.

    Was this answer helpful to you?   Yes No
    0 of 3 people found this answer helpful.
  • Asked by Judie from San Diego, Ca
    05/06/2021
    Q
    indian hawthone leaves are tuning yellow and dropping. Can I use Bonide Copper Fungicide?
    A

    The Bonide Copper Fungicide can be used on a variety of shrub species, but since the label does not specifically mention indian hawthorne we would recommend testing a small spot of the plant first before applying it to make sure no adverse effects occur. We would highly recommend having someone local help you determine what is causing the yellowing of the leaves as it could be disease, insects, or nutrient deficiency. 

    Was this answer helpful to you?   Yes No
    0 of 2 people found this answer helpful.
  • Asked by Sharon from Ellis Grove Illinois
    02/23/2021
    Q
    How much Bonide Copper Fungicide is needed per one gallon of water?
    A

    The amount of Bonide Copper Fungicide powder to use, will vary depending treatment. Add recommended amount of powder, per the label, to small amount of water, strain, add remainder of water and spray - agitate sprayer to keep nozzle from plugging. Apply 3 gallons of mixed solution to a small tree or bush, 6 gallons of mixed solution to a medium size tree, or 9 gallons of mixed solution to a large tree. Thoroughly spray upper and lower surfaces of foliage to the point of runoff. Do not overspray.

    Was this answer helpful to you?   Yes No
    0 of 8 people found this answer helpful.
  • Asked by Naomi from Oklahoma
    11/12/2020
    Q
    Can I spray Bonide Copper Fungicide every day on marijuana plants?
    A

    Bonide Copper Fungicide is not specifically labeled for cannabis. We suggest reaching out to your county extension office for advice on what can be used. 

    Was this answer helpful to you?   Yes No
Displaying 1 to 20 (of 20 questions)