Bonide Root & Grow Root Stimulator 4-10-3 - Questions & Answers

Displaying 1 to 19 (of 19 questions)
Sort:
  • Asked by Pam
    04/05/2013
    Q
    Is Bonide Root & Grow Root Stimulator made for daily use?
    There's no instructions for how often the use this product. Please explain product use. Thank you
    A
    The Bonide Root & Grow Root Stimulator 4-10-3 is meant to be used at the time of planting or transplanting then once established, it is applied at 4-6 week intervals, it would not be applied every day.  Complete instructions on the product label
    Was this answer helpful to you?   Yes No
    43 of 56 people found this answer helpful.
  • Asked by Neil from Dickinson, Nd
    06/08/2017
    Q
    How much Bonide Root & Grow Root Stimulator 4-10-3 do I need to use per tree? (12 to 16 inch tall trees?)
    A
    Per the product label for Bonide Root & Grow Root Stimulator 4-10-3: You use 3 ½ tbs per gallon of water. When transplanting trees: Use from 1-8 pints of diluted Bonide Root & Grow per plant, depending on size. For smaller trees you can use 1 pint per plant. For established plants,  Use 1 gallon of diluted solution per 250 sqft.  Apply at first signs of new growth in spring and repeat every 4-6 weeks throughout the growing season.  Water thoroughly.
    Was this answer helpful to you?   Yes No
    30 of 40 people found this answer helpful.
  • Asked by Evelyn from Canyon Lake, Tx
    06/27/2017
    Q
    Do I use the Bonide Root & Grow Root Stimulator 4-10-3 once, or do I use it more?
    I am planting a crape myrtle. It is about 6 ft tall.
    A

    The Bonide Root & Grow Root Stimulator 4-10-3 is meant to be used at the time of planting or transplanting and then at 4-6 week intervals per the product label

    Was this answer helpful to you?   Yes No
    23 of 29 people found this answer helpful.
  • Asked by Al from Canfield
    05/09/2019
    Q
    Transplanting a clematis. How much Bonide Root & Grow Root Stimulator 4-10-3 per gallon?
    A

    Bonide Root & Grow Root Stimulator 4-10-3 would be mixed at the rate of 3 ½ tbs  to 1 gal. water per the product label.  Use from 1-8 pints of diluted Bonide Root & Grow per plant, depending on size. For example, 1 pint of the mixture on mums, geraniums and other annual flowers. For Rose bushes and Camellias, use 3 pints per plant. For larger than 4 foot plants (trees and large shrubs), use 1 gallon of the mixture per plant. Pour diluted solution over the soil as the roots are being covered, making sure that the roots are wet with the solution. Wet soil around plants with water after planting

    Was this answer helpful to you?   Yes No
    16 of 19 people found this answer helpful.
  • Asked by Louise from Denver, Co
    05/15/2013
    Q
    How often should Bonide Root & Grow Stimulator be applied after planting new plants?
    A
    For established plants the Bonide Root & Grow Root Stimulator 4-10-3  is applied at 4-6 week intervals.  Complete instructions on the product label
    Was this answer helpful to you?   Yes No
    9 of 27 people found this answer helpful.
  • Asked by Rhonda from Mokena
    11/04/2020
    Q
    How much Bonide Root & Grow Root Stimulator 4-10-3 do I use for one cup of water?
    I am planting a new 5 inch peony tree and water to mix just one cup's worth.
    A

    When transplanting trees: You use 3 ½ tbs of Bonide Root & Grow Root Stimulator 4-10-3 per gallon of water.  Use from 1-8 pints of diluted Bonide Root & Grow per plant, depending on size.  For smaller trees you would use at least 1 pint of mixed solution.  Pour diluted solution over the soil as the roots are being covered, making sure that the roots are wet with the solution. Wet soil around plants with water after planting.  The product is not meant to be used in any less quantity for effectiveness.

    Complete instructions on the product label
    Was this answer helpful to you?   Yes No
    6 of 6 people found this answer helpful.
  • Asked by Mike from Norfolk, Va
    07/18/2016
    Q
    Can I use Bonide Root & Grow Root Stimulator 4-10-3 when taking clippings?
    A

    Bonide Root & Grow Root Stimulator 4-10-3 would be used when you are transplanting the listed plants and does not mention rooting when clipping on the product label.

    Was this answer helpful to you?   Yes No
    5 of 13 people found this answer helpful.
  • Asked by Julie from Jamesville,n.y.
    04/28/2021
    Q
    Is Bonide Root & Grow Root Stimulator 4-10-3 a powder?
    A

    Bonide Root & Grow Root Stimulator 4-10-3 is a liquid formulation.

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Sarah from Westminster, Co
    06/08/2021
    Q
    How much Bonide Root & Grow should I use for a 8 foot, newly transplanted blue spruce tree?
    A

    Per the product label for Bonide Root & Grow Root Stimulator 4-10-3: When transplanting trees:  You use 3 ½ tbs per gallon of water.  Use from 1-8 pints of diluted Bonide Root & Grow per plant, depending on size. For larger than 4 foot plants (trees and large shrubs), use 1 gallon of the mixture per plant. Pour diluted solution over the soil as the roots are being covered, making sure that the roots are wet with the solution. Wet soil around plants with water after planting

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Thomas from Edmond Ok
    03/15/2021
    Q
    What is the mixing ratio of Bonide Root & Grow Root Stimulator 4-10-3 for newly planted trees small 24 " tall?
    A
    Per the product label for Bonide Root & Grow Root Stimulator 4-10-3: You use 3 ½ tbs per gallon of water. When transplanting trees: Use from 1-8 pints of diluted Bonide Root & Grow per plant, depending on size. For smaller trees you can use at least 1-2 pints per plant. For established plants,  Use 1 gallon of diluted solution per 250 sqft.  Apply at first signs of new growth in spring and repeat every 4-6 weeks throughout the growing season.  Water thoroughly.
     
    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Ron from Webster City, Ia
    04/26/2021
    Q
    I am transplanting tomatoes to garden and how often to use Bonide Root & Grow Root Stimulator 4-10-3?
    A
    The Bonide Root & Grow Root Stimulator 4-10-3 is meant to be used at the time of planting or transplanting then once established, it is applied at 4-6 week intervals.  Complete instructions on the product label
    Was this answer helpful to you?   Yes No
    0 of 2 people found this answer helpful.
  • Asked by Donna from Lansing, Il
    09/14/2021
    Q
    Can you use the Root & Grow on top of sod that was just laid & how often? Thank You!
    A

    Bonide Root & Grow Root Stimulator 4-10-3 is labeled for use on ornamental plants, flowers, shrubs, trees and houseplants, but is not intended for use on turf, sod or landscaped areas. 

    Was this answer helpful to you?   Yes No
  • Asked by John from Lordsburg, Nm
    10/19/2021
    Q
    How much Bonide Root & Grow Root Stimulator 4-10-3 do I use for a 6 ft non-bearing pear tree?
    A

    Per the product label for Bonide Root & Grow Root Stimulator 4-10-3: You use 3 ½ tbs per gallon of water.  When transplanting trees: Use from 1-8 pints of diluted Bonide Root & Grow per plant, depending on size. For larger than 4 foot plants (trees and large shrubs), use 1 gallon of the mixture per plant. Pour diluted solution over the soil as the roots are being covered, making sure that the roots are wet with the solution. Wet soil around plants with water after plantingFor established plants. Use 1 gallon of diluted solution per 250 sqft.  Apply at first signs of new growth in spring and repeat every 4-6 weeks throughout the growing season.  Water thoroughly.

    Was this answer helpful to you?   Yes No
  • Asked by Caroline from Arlington Texas
    06/09/2022
    Q
    Is there micronutrients in Bonide Root & Grow Root Stimulator 4-10-3? Having problems with elephant ears coming up
    Elephant ears aren't coming up
    A

    Bonide Root & Grow Root Stimulator 4-10-3 does not contain any micronutrients.  Only Nitrogen, Phosphate, and Soluble Potash.

    Was this answer helpful to you?   Yes No
  • Asked by Jamie from Loon Lake, Wa
    07/24/2022
    Q
    What if I accidentally mixed 2 cups of Bonide Root & Grow Root Stimulator 4-10-3 instead of 3.5 tablespoons?
    Will this hurt my tree or my ok
    A

    Yes, this could damage your tree with over application of Bonide Root & Grow Root Stimulator 4-10-3 . Please contact the manufacturer for further assistance since this is an off label usage.

    Was this answer helpful to you?   Yes No
  • Asked by Shannon from Monmouth
    11/09/2022
    Q
    Is there a expiration date on Bonide Root & Grow Root Stimulator 4-10-3?
    A

    Bonide Root & Grow Root Stimulator 4-10-3 has a 3-5 year shelf life when stored properly. The container may not have an expiration date shown on it, however, if you contact the manufacturer with the lot number, they will be able to tell you when the product was manufactured. You may reach Bonide directly at (315) 736-8231.

    Was this answer helpful to you?   Yes No
  • Asked by Daniel from Ct
    09/04/2023
    Q
    Can you apply Bonide Root & Grow Root Stimulator 4-10-3 as a foliar application?
    A

    Bonide Root & Grow Root Stimulator 4-10-3 is not directed to be applied as a foliar spray.  When treating recommended crops (edibles) on the label there are instructions for broadcast applications, row or and and injection applications.   Per the product label for most plants, pour the diluted solution over the soil as the roots are being covered making sure the roots are wet with the solution. Wet soil around plant with water after planting. 

    Was this answer helpful to you?   Yes No
  • Asked by Jeff from Kendall
    03/01/2024
    Q
    For tree trimmings, like willow branches, dogwood, how much Bonide Root & Grow Root Stimulator 4-10-3 to use?
    How much concentrate in water to promote roots for transplanting?
    A
    Per the product label for Bonide Root & Grow Root Stimulator 4-10-3: You use 3 ½ tbs per gallon of water. When transplanting trees: Use from 1-8 pints of diluted Bonide Root & Grow per plant, depending on size.  For established plants,  Use 1 gallon of diluted solution per 250 sqft.  Apply at first signs of new growth in spring and repeat every 4-6 weeks throughout the growing season.  Water thoroughly.
    Was this answer helpful to you?   Yes No
  • Asked by Tiffany from Charlestown
    03/04/2024
    Q
    Is there a dilution ratio for fully rooted plants that live in a vase of water with Bonide Root & Grow Root Stimulator 4-10-3?
    Some of my propagation have many roots but still currently live in their vase or water, I have not yet moved to soil. Can I use this product in the vase of water? If so, what is the mixing ratio?
    A

    Bonide Root & Grow Root Stimulator 4-10-3 will be used in the soil not the water in the vase.  You would need to wait until they are in the soil to use the product.

    Was this answer helpful to you?   Yes No
Displaying 1 to 19 (of 19 questions)