Kelly from Forsyth Ga writes
Just purchased a house and the previous owner had dogs which were not treated and the yard was not treated. we are working on the house and there is nothing inside and am just wondering if this can be used along the baseboards/windows/etc since the house is empty?
You can use Bifen IT in all of the cracks and crevices along baseboards, door frames, window frames and places where cables pipes and wires enter through the walls and it will help control fleas in that area. Bifen IT cannot be used as a broadcast spray indoors over floors where fleas are known to develop and because of this is not usually chosen for flea control indoors. We recommend you use Ultracide for indoor flea control. It is our recommendation and industry standard that you vacuum immediately before the application of Ultracide and every day or every other day after the application for the next two weeks. Vacuums can physically remove a decent percentage of flea eggs that are in the carpet, along with much of the organic crud that the flea larvae feed on. A critical part of the diet of the larva is dried blood, present there as fecal material from the fleas that are on the pets. Wherever the pets spend time, they will shed the fecal matter and the eggs, so it is extremely important that you focus on these potential hot spots where the pets sleep. A vacuum also will remove a small percentage of larvae, but the larva is pretty tenacious, and will wrap around the carpet fibers down there at the base of the pile, and hold on for dear life as the vacuum passes by. The pupa is even tougher to physically remove, for it uses fibers as part of its "cocoon". The vacuum will stimulate the flea adults still in their pupa form to quickly emerge as the adult, and at this point perhaps be sucked up in the vacuum. Even if they are not removed by the vacuum, at least they now are exposed and susceptible to your treatment. After two weeks most infestations require that you do a second application of the Ultracide and continue with the vacuuming.
Answer last updated on: 08/02/2012