Yes, 3336F can be used on orchids as directed on the product label. It is mixed with water and sprayed.
Clearys 3336F is not labelled for a drench application on plum trees. It is for foliar application only. You will use 22 oz per acre at the first sign of disease. Complete instructions on the label.
Clearys 3336F Fungicide is not labeled for any drench application on fruit trees it is only applied directly to the foliage as directed on the product label. The rate given for cherry and plum trees is for larger areas, given per acre at the rate of 22.5 oz per acre in 100 gallons which breaks down to 1.41 tsp per gallon. You could use a hose end sprayer to apply Clearys 3336F as long as you can properly calibrate it to spray the recommended amount of product per gallon of water, though it is not as accurate as using a pump/backpack sprayer.
Clearys 3336F is labeled for powdery mildew applied as a foliar spray only when the disease first appears and repeat every 7-14 days during disease period per the product label.
3336F Fungicide is not labeled for buxus blight. We do recommend contacting local extension office for identification and advise on what you can use.
Yes, 3336F Fungicide is labeled for the prevention of large brown patch. Please refer to the product label for complete instructions.
3336F Fungicide is applied with sufficent water at the time of application with no rainfall/irrigation with 24 hours of the application. Per the label only specific diseases require watering in after application so in general it is not needed. You should not apply more fungicide to the area before the interval timing listed on the label per area.
Yes, you can apply Cleary's 3336 Fungicide 2 weeks after applying Azoxy 2SC.
Just about any insecticide can be tank mixed with 3336F Fungicide, you would just need to do a jar test first to make sure they're compatible once mixed.
Clearys 3336F Fungicide is not labeled for Rhizosphaera needlecast. We do carry Garden Tech Daconil Fungicide that can be applied to spruce trees for treating this fungus and you can review the product label for the complete use instructions.
Yes, you can use 3336F Fungicide on a cherry tree, but only before the fruit has set. The rate is 22.5 oz per acre.
Depending on the disease you are targeting, excessive irrigation/rainfall may move the application of 3336F Fungicide below the root zone and reduce the effectiveness of the treatment. We recommend waiting at least 7 days to reapply the fungicide if there was rainfall immediately following the application and be sure to have atleast 24 hrs following the application before rainfall is expected.
The only exception with Clearys 3336F would be if you are targeting root pathogens (diseases) where the product label recommends additional light watering (1/10th to 2/10th’s inch of water) to move the active ingredient into the root zone.
It is possible to mix two fungicides together as long as they have different active ingredients and modes of action. Clearys 3336 (Group 1) can be tank mixed with Prime Source's Propiconazole 14.3 Fungicide (Group 3) by following the Tank Mixing Instructions listed on the individual product labels.
If treating for an active lawn dieseas, we recommend treating with one fungicide for 2-3 applications at the recommended day intervals per the product label then rotate to the 2nd fungicide for the same number of applications and interval period per that fungicide product label.
The application rate for 3336F Fungicide will depend on the specific disease being treated. When treating azaleas and ornamentals, you will apply as a full coverage spray to the point of drip to the foliage(bush).
Refer to page 7 on the product label for application rates for Ornamentals and more information.
For prevention of Pythium Blight, Headway G Fungicide would be a recommended preventative fungicide to apply in the fall. This granular fungicide uses 2 active ingredients, Azoxystrobin & Propiconazole to provide different modes of action for preventative applications.
For control of Pyrthium Blight in Spring/Summer, Prime Source Propam Select Fungicide can be used in a fungicide rotation program to control and prevent Pythium Blight.
Please view our Pythium Blight Treatment Guide in our Lawn Care Guides section of the website for more information.
Yes, you can apply Clearys 3336F on fescue seedlings as there is no set time restriction between seeding and applying the fungicide.
View the full product label for more information.
The only comments in regards to cactus on the Clearys 3336F product label is that it should not be used on Easter Cactus.
We would recommend consulting with your County Extension Office for a positive id of the disease and for approved fungicide recommendations as 3336F Fungicide is only labeled for applications to lawns, turfgrasses, bedding plants, annual and perennial flowers, trees and shrubs.
