How Cy-Kick CS Works

The active ingredient in Cy-Kick CS is Cyfluthrin, a synthetic pyrethroid that attacks the central nervous system of target pests. Made to mimic the effects on insects of naturally occurring pyrethrum, man-made cyfluthrin has the advantage of remaining effective for up to 3 months. SmartCap Technology means Cy-Kick CS stands up to porous and highly absorbent surfaces such as concrete, while the polymer shell protects the active ingredient making it readily available to pests. When sprayed, Cy-Kick CS creates a thick barrier of microcapsules that is impossible for insects to cross without being exposed to a lethal dose of insecticide. Exposed insects pick up microcapsules on their hairs and body, triggering a rapid release of the active ingredient, resulting in death. Though Cy-Kick CS is tough on insects, it is very gentle on people and pets when used correctly.

Target Insects

A wide variety of structural pests including ants, bed bugs, cockroaches, earwigs, fleas, millipedes, mosquitoes, scorpions, spiders, wasps, bees, and yellowjackets

INSECTS CONTROLLED: Ants, Asian Lady Bugs, Bed Bugs, Bees, Boxelder Bugs, Cadelles, Carpenter Ants, Carpenter Bees, Carpet Beetles, Centipedes, Chocolate Moths, Cigarette Beetles, Clover Mites, Cluster Flies, Cockroaches, Crickets, Darkling Beetles, Dermestids, Drugstore Beetles, Earwigs, Elm Leaf Beetles, Fire Ants, Firebrats, Fleas, Flies, Flour Beetles, Grain Weevils, Grasshoppers, Hide Beetles, Hornets, House Flies, Indian Meal Moths, Larder Beetles, Lesser Grain Borers, Lesser Mealworms, Loopers, Mediterranean Flour Moths, Merchant Grain Beetles, Mealworms, Millipedes, Mosquitoes, Psocids, Rice Weevils, Sawtoothed Grain Beetles, Scorpions, Silverfish, Sowbugs, Spiders, Springtails, Stable Flies, Stored Product Pests, Termites, Ticks, Yellowjackets, Warehouse Moths, Wasps, Wood Wasps, Wood-Infesting Borers and Beetles

Target Uses

Cy-Kick CS is an ideal broad-spectrum insecticide for prevention, maintenance, or active infestations of over 55 common structural pests in residential and commercial applications. SmartCap Technology makes Cy-Kick CS ideal for a variety of surfaces, including porous and highly absorbent areas like concrete and mulch. SmartCap microencapsulation also increase the residual life of Cy-Kick CS to up to 90 days, making it ideal for quarterly pest control treatments. Because Cy-Kick CS is a microencapsulated suspension, it is more resilient in direct sunlight and more easily picked up by tough pests such as cockroaches, scorpions, and mosquitoes.

Application Instructions

Cy-Kick CS can be used inside as a crack and crevice treatment or outside as a perimeter treatment for listed pests, for localized treatment of wood-destroying insects, for outdoor mosquito control, and for yellow jacket baiting outdoors. See below for further details. Always read the product label completely before use.

Mixing instructions - Thoroughly clean spray equipment before using Cy-Kick CS. Shake concentrate well before diluting. When diluting, first add approximately one-half of the water to the spray tank and then add the proper amount of Cy-Kick CS. When emptying the bottles, triple rinse with water, shake well and add the rinsate to the spray tank. Add the rest of the water and agitate the sprayer thoroughly. Agitate sprayer occasionally during use to ensure even mixture. Shake or re-agitate sprayer if spraying is interrupted or if dilution is left in sprayer overnight. If spray screens are used, they should be 50 mesh or larger. See video above for handheld sprayer application.

Void/Crack and Crevice Application - To treat insects harbored in voids and in cracks and crevices, apply with equipment designed for void applications. Follow the manufacturer's recommendations for proper equipment set up and operating pressures. Place the tip of the applicator at or into the crack or crevice to be treated. Apply product in short bursts while keeping tip in position. Allow the air stream to push insecticide deep into voids. Application should be made in such a manner to limit dripping and run-off on structural surfaces and plants.

• 16 ounce bottle yields 8-16 gallons of finished solution for standard application rates.
• 120 ounce bottle yields 60-120 gallons of finished solution.
• 1 gallon of finished solution covers approximately 1,000 square feet.
• For higher volume outdoor applications, a 16 oz. bottle treats 16,000 to 32,000 sq. ft. and 120 oz. bottle treats 120,000 to 240,000 sq. ft. (approximately 2.75 - 5.5 acres).

Standard Application Dilution rates / Mixing Ratios

• 1.0 fl. oz. (30 ml) gal. of water – 0.05% - maintenance, prevention applications
• 2.0 fl. oz. (60 ml) gal. of water – 0.10% - clean-out applications, longer residual control, or high insect infestations
• For outdoor perimeter treatments, use 0.5-1.0 fl. oz/1,000 square feet in sufficient water to adequately cover the area being treated. Alternate directions are to use 4-8 fl. oz/ 50 gal. of water. See product label for Suggested Mixing Chart for Larger Tank Sizes.
• For yellowjacket baiting outdoors, use 2.0 g of concentrate to 100 g of bait matrix. See below for details.

Use in the Following Areas:

Apartments, Calf Hutches, Calving Pens and Parlors, Campgrounds, Empty Chicken Houses, Dairy Areas, Dog Kennels, Food Storage Areas, Grain Mills, Granaries, Hog Barns, Homes, Horse Barns, Hospitals, Hotels, Meat Packing Plants, Food Processing Plants, Milkrooms, Motels, Nursing Homes, Rabbit Hutches, Resorts, Restaurants and other Food Handling Establishments, Schools, Supermarkets, Transportation Equipment (Buses, Boats, Ships, Trains, Trucks, Planes (do not use in airplane cabins)), Utilities, Warehouses, Commercial and Industrial Buildings; Federally inspected meat and poultry plants, Livestock Housing

Indoors

Dilute Cy-Kick CS to 0.05% or 0.10% (1.0 oz. or 2.0 oz) with water using the spray dilution chart. Cy-Kick CS should be used as a Crack & Crevice residual product where insects may be hiding, living and breeding and/or for selected spot application. When using in food/feed areas of food/feed handling establishments, restaurants or other areas where food/feed is commercially prepared or processed, refer to the section entitled “Food/Feed Areas of Food Handling Establishments” on product label for use directions. Non-food/feed areas are areas such as garbage rooms, restrooms, floor drains (to sewers), entries and vestibules, offices, locker rooms, machine rooms, boiler rooms, garages, mop closets and storage (after canning or bottling).

Bed Bugs – Apply to cracks and crevices where evidence of bed bugs occurs. This includes bed frames, box springs, inside empty dressers and clothes closets, carpet edges, high and low wall moldings and wallpaper edges. Do not use this product on mattresses, pillows, bed linens or clothes. Remove all clothes and other articles from dressers or clothes closets before application. Allow all treated areas to dry thoroughly before use. Not recommended for use as sole protection against bed bugs.

• Do not apply more than twice per week. Treatments must be at least 3 days apart.
• Cy-Kick CS may be converted to a foam and the foam used to treat structural voids to control insect and arthropod pests in walls, under slabs or in other void areas. Apply as a dry foam (approx. 25:1).

Outdoors

Cy-Kick CS can be used as a residual treatment on outdoor surfaces and/or as a crack, crevice and void treatment of buildings, porches, window frames, leaves, patios, garages, garbage dumps and other areas where pests congregate or enter premises. Repeat treatment as necessary to maintain effectiveness, but not more than twice per week. Treatments must be at least 3 days apart. Use the 0.05% or 0.10% (1.0 oz. or 2.0 oz) rate. Cy-Kick CS can be used as a residual treatment to control pests in outdoor void areas such as meter boxes and manholes. Repeat treatment as necessary, but not more than twice per week. Treatments must be at least 3 days apart. Use the 0.05% or 0.10% (1.0 oz. or 2.0 oz) rate.

Perimeter Treatment - To help prevent infestations of buildings, treat a band of soil 6 to 10 feet wide around and adjacent to the building. Also treat the building foundation to a height of 2 to 3 feet where pests are active and may find entrance. Treat other insect entry points such as doors, windows, under siding and eaves of structure. Cy-Kick CS may be applied in compressed air, backpack or power spray equipment. An application rate of 0.5 to 1.0 fluid ounce of Cy-Kick CS per 1000 sq. ft. is desirable. Apply in sufficient water to adequately cover the area being treated. Application should be made in such a manner to limit dripping and run-off on structural surfaces and plants. Alternate directions are to use 4 to 8 fl. oz. of product per 50 gallons of water.

Mosquitos – Use handheld, backpack, or truck mounted sprayers only. Use up to 150 gallons of diluted spray per acre. Treat shrubbery, vegetation and other areas where mosquitoes may rest. Shrubbery and vegetation around stagnant pools, marshy areas, ponds, and shorelines may be treated if applied as a wet spray.

Fleas – Treat infested areas. This product will kill fleas on contact but does not provide residual control.

Yellow Jacket Control Outdoors – Add 2.0g of concentrate to 100g of bait matrix and mix thoroughly (approximately ¼ tsp of concentrate per 3.75 oz. of bait) per dispenser. Mix only enough bait for immediate use. Hang dispensers in a sunny location, from a tree limb or other suitable support around the periphery of the area to be protected and at heights inaccessible to children and pets. Use 3-4 dispensers/acre or place them about 100 ft apart. Replenish dispensers with fresh bait as long as yellowjackets are present. Unused baits will probably be unattractive to yellowjackets after a few days, especially if temperatures are above 90 degrees F. See product label for more details on baiting suggestions and how to make and mark dispensers. See also our Alpine Yellow Jacket Bait Station Kit with Onslaught.

Cy-Kick CS Features

• Pet safe when dry
• Virtually no odor or staining
• Easy mixing ratios
• Labeled for applications in food-handling establishments
• SmartCap Technology protects active ingredient from UV rays and porous surfaces.
• SmartCap Technology reduces exposure risk during mixing and application.
• Convenient squeeze and pour containers make measuring and mixing easy.
• Broad-spectrum killing power and 90-day residual control of structural pests on all surfaces
• SmartCap Technology offers extended residual control and enhances performance on porous and highly absorbent surfaces and in direct sunlight.
• Insects easily pick up optimal sized SmartCap microcapsules, leading to the fast diffusion of the active ingredient into the exoskeleton of the pest.
• The microcapsule is designed to release the active ingredient into the exoskeleton of insects while reducing its exposure to mammals.

Extra Tips for Using

• Cy-Kick CS should be applied with handheld, backpack, or truck mounted sprayers only.
• Not for use in outdoor residential misting systems or fogging devices.
• Allow at least 30 minutes after application before allowing pets or children into treatment area. For best results, allow 24 hours after outdoor application before expected rainfall or watering.
• Store out of direct sunlight and extreme temperatures.
• Use concentrate within 3 years of purchase for best results.
• Not for use on edible vegetation.
• Heavy applications may leave a visible deposit on some surfaces.
• Shake concentrate well before mixing.
• Does not provide instant knockdown of bees, wasps, and yellowjackets.