Application Rates for Ferti-Lome Root Stimulator and Plant Starter Solution 4-10-3 are as follows: Flowers, shrubs and trees: 3-1/2 tablespoons per gallon of water. Mix 1-8 pints per plant transplanted.
Ferti-Lome Root Stimulator and Plant Starter Solution 4-10-3 is not labeled to be used on lawns so we cannot recommend you do so.
Normally, Fertilome Root Stimulator and Plant Start Solution is applied as you are putting in the new tree/plant to the soil. This is typically only a one time treatment that gets followed up after application with a watering of the soil around the new plant.
Ferti-Lome Root Stimulator and Plant Starter Solution 4-10-3 is concentrated and must be diluted with water according to the product label for the application you are using for. How many gallons it makes depends on the rate used
Normally Ferti-Lome Root Stimulator and Plant Starter Solution 4-10-3 is applied as you are putting in the new tree/plant in soil, we can find no instructions for using with plants in water. You can contact the manufacturer VPG at 1-888-583-5296 to see if you can use and if so what the instructions are.
Ferti-Lome Root Stimulator and Plant Starter Solution 4-10-3 can be applied to the following areas: Trees, Shrubs, Roses, House Plants, Annual and Perennial Ornamentals only. It is not labeled to be used on any lawns so we cannot recommend you do so.
Applying this product in calm weather when rain is not predicted for the next 24 hours will help to ensure that wind or rain does not blow or wash pesticide off the treatment area.
We would recommend reaching out to the manufacturer for applications after planting, you can contact the manufacturer VPG at 1-888-583-5296.