Buy 2 or more: $1,177.71 each
Have a Question? Ask Our Pros!
Fusilade II Turf and Ornamental herbicide is a selective post-emergent herbicide that controls a long list of perennial and annual grass weeds in turf and landscaped areas. Not only is Fusilade II fast and effective, but it can be applied as a spot treatment or an over the top application without damaging ornamental plants. It can also be used to remove bermuda grass from tall fescue and zoysia grass when used at reduced rates. Fusilade II can stand up to rain after only 1 hour of application.
It is recommended that a non-ionic surfactant be used when applying Fusilade II.
Product Documents
Active Ingredient | Fluazifop-P-butyl 24.5% |
---|---|
Target pests |
Barnyardgrass, Crabgrass (large, smooth, southern), Foxtail, Goosegrass, Quackgrass, Witchgrass, Wild oats and many others * See label for complete list |
For use in |
Landscaped areas, Nurseries, Greenhouses, Parks, Sports Fields, Golf Courses, Commercial & Residential areas * See label for complete list |
Application |
0.4 - 0.6 per 1,000 sq. ft. 16 - 24 oz. per acre + 0.25% (8 oz. per 25 gallons) of Non-ionic Surfactant 0.75 oz. per gallon of water (0.5 oz. Non-ionic Surfactant) * Use a Surfactant to Increase Effectiveness * See label for complete application instructions |
Pet safe | Yes, if used as directed on Label |
Formulation |
Professional Product Group 1 Herbicide |
NOT FOR SALE TO | AK |
Shipping Weight | 2.29 lbs |
Manufacturer | Syngenta (Mfg. Number: 73215) |
EPA Registration | 100-1084 |
Fusilade II works fast, moving quickly into the shoots, roots, rhizomes, stolons and growing points of the treated plants.
Weed growth is soon arrested, and within just one week there will be loss of vigor, yellow and/or reddening, and eventual death of the treated grass weeds.
Usage chart for spot treatments:
1 gallon water + .75 oz. Fusilade + .5 oz surfactant
10 gallons water + 6.5 oz. Fusilade + 3 oz surfactant
25 gallons water + 16 oz. Fusilade + .5 pint surfactant
50 gallons water + 32 oz. Fusilade + 1 pint surfactant
Expensive but Works!
By Roger on 09/01/2011
I use Fusilade II to kill the bermuda and crab grass growing in a large bed in which I'm trying to get Periwinkle (vinca minor) to take over as the predominant ground cover. I mixed the Fusilade with a spreader/sticker/penetrant called Cadence made by KALO, Inc. I oversprayed the Periwinkle and grass with the mix and (you have to be patient) after about 5 to 7 days the grass was dead and gone and the Periwinkle was untouched.
Was this review helpful to you? YesNo
147 of 154 people found this review helpful
Works great!!!
By Lisa on 08/31/2015
I mixed the Fusilade w/surfactant per the label instructions and applied it to my lawn 8 days ago with a garden sprayer. Already the Bermuda grass has yellowed and looks dead. I will reapply in 20 more days just to make sure and then reseed in 14 days. The fescue seems to have survived quite well.
Was this review helpful to you? YesNo
109 of 112 people found this review helpful
A great Herbicide for grasses
By Harold on 06/06/2011
After early research on Fusilade in the 80s with UCCE in CA for crop use, I (aswell as my friends) now find it useful in my flower garden for selective control of annoying annual and perennial grass in Seattle's wonderful gardening climate. But it doesn't control annual bluegrass or fescues. It has some odor so wear plastic gloves. It takes more than a week to get control, but rest after that week. Prompt shipping by this online company.
Was this review helpful to you? YesNo
74 of 80 people found this review helpful
Fusilade II for Torpedo grass
By Russll on 07/13/2012
Bermuda control
By Richard on 06/17/2011
The directions look to be a mix of 2.5 oz to 3.0 oz per acre and add a surfactant, but not sure of amount. Also, it is suggested to apply about June 1st. I live in Bakersfield, CA. Am I to apply more than once, and how long between applications?
Fusilade II Herbicide can be used to remove Bermuda grass from zoysia grass when used at reduced rates. Applications should be made around June 1st per the product label.
Apply 0.07-0.14 oz/1000 sq. ft. (3-6 oz./A) along with 0.25% v/v (1/2 pt./25 gals.) of a nonionic surfactant. Application should be made every 28 days when the grass weeds are actively growing.
Keep in mind for herbicides the amount of water is not important. What is important is getting the correct amount of product, over the correct amount of area. Mark off 1000 sq/ft and fill your sprayer tank with only water. Spray as if you were covering the area with the herbicide. However many gallons it takes you to cover that area is how many gallons to mix the product with. Everyone's walking speed and how heavily they spray is different, which is why whether you use 2 gallons or 8 gallons of water to cover 1000 sq/ft, you are correct.
Usage chart for spot treatments:
1 gallon water + .75 fl oz of Fusilade + .5 oz surfactant
10 gallons water + 6.5 fl oz Fusilade + 3 oz surfactant
25 gallons water + 1 pint Fusilade + .5 pint surfactant
50 gallon water + 1 qt Fusilade + 1 pint surfactant
Was this answer helpful to you? YesNo
156 of 173 people found this answer helpful
Was this answer helpful to you? YesNo
147 of 155 people found this answer helpful
I have strands of Bermuda throughout my Fescue lawn - too much to hand pull and destroy. I need chemical to kill just the Fescue
Bermuda would be considered a grassy weed, so you need a product that is geared towards grassy weeds and not broadleaf weeds. We want to be clear that bermuda can be suppressed, but it is VERY difficult to kill completely. It will take multiple treatments to finally kill it. But Fusilade II is usually the go to product for this issue.
This is directly off of the product label:
Apply 0.07-0.14 oz/1000 sq. ft. (3-6 oz./A) along with 0.25% v/v (1/2 pt./25 gals.) of a nonionic surfactant. Application should be made every 28 days when the grass weeds are actively growing. The higher rates may result in temporary discolorization of the desirable turf with recovery in 10-14 days. Do not apply to desirable turf which is under stress. For best results, make applications in spring and fall and avoid treatments during July and August.
Complete control of undesirable grass may take 1-2 growing seasons.
We also recommend calling your local county extension office as they usually know the optimum times for spraying lawns in your area.
Was this answer helpful to you? YesNo
130 of 141 people found this answer helpful
We have three or four spots of Bermuda grass in our lawn and we would like to eliminate them, or at least minimize them as much as possible. 1. When is the best time/times to apply Fusilade II? 2. What is the best concentration to apply for this purpose to minimize damage to the fescue, which we want? Thanks very much!
This is directly off of the product label:
Apply 0.07-0.14 oz/1000 sq. ft. (3-6 oz./A) along with 0.25% v/v (1/2 pt./25 gals.) of a nonionic surfactant. Application should be made every 28 days when the grass weeds are actively growing. The higher rates may result in temporary discolorization of the desirable turf with recovery in 10-14 days. Do not apply to desirable turf which is under stress. For best results, make applications in spring and fall and avoid treatments during July and August.
Complete control of undesirable grass may take 1-2 growing seasons.
We also recommend calling your local county extension office as they usually know the optimum times for spraying lawns in your area.
Was this answer helpful to you? YesNo
67 of 85 people found this answer helpful
I want to kill weeds in a liriopi bed. What mix ratio of Fusilade should I use ( i.e. how much fusilade to add per gallon of water)?
Was this answer helpful to you? YesNo
63 of 116 people found this answer helpful
Fusilade II Herbicide Rating: 4.1 (79 Reviews / 316 Q&A)