-
Asked by Danielle from London, Arkansas05/29/2020QHow much Hi - Yield Fast Acting Lime do I need?
My lawn pH is 5.3, how much Hi - Yield Fast Acting Lime do I need to apply to get the pH to about 6.8AThe amount and number of applications of Pennington Fast Acting Lime you need to put down is determined by what your soils starting pH would be to compare to the scale on the product label. One 6 pound bag of Pennington Fast Acting Lime will cover approximately 1,000 square feet on lawns for…
Read Full Answer »The amount and number of applications of Pennington Fast Acting Lime you need to put down is determined by what your soils starting pH would be to compare to the scale on the product label. One 6 pound bag of Pennington Fast Acting Lime will cover approximately 1,000 square feet on lawns for pH that is 6.0 and above. One 30 pound bag will cover approximately 5,000 square feet. Per the product label: You will add an additional 6lbs/1,000 sqft on the application rate for each 1/2 point of pH below 6 (i.e., use 12lbs for pH 5.5-6.0, 18lbs for pH 5.0 - 5.5, etc.). You should test your soil to determine the current after each each application to be sure. -
Asked by Byron from Leesburg, Fl05/02/2021QHow often should Hi - Yield Fast Acting Lime be applied?
I had a soil test done for my citrus trees and the results came back saying my soil had a low PH. They recommended using lime to correct it. I have used it once.AIt's hard to say how many applications you may need to do of the Hi Yield Fast Acting Lime as that would be dependent a little bit on where you pH level started and what your goal number is for ideal health of the trees. Typically, treatments are done once or twice a year in spring or fall if ne…
Read Full Answer »It's hard to say how many applications you may need to do of the Hi Yield Fast Acting Lime as that would be dependent a little bit on where you pH level started and what your goal number is for ideal health of the trees. Typically, treatments are done once or twice a year in spring or fall if needed. -
Asked by R. from Midland, Mi07/01/2021QWhat is the application of Hi - Yield Fast Acting Lime per acre, to raise lime content to 7 from 6.1?A
Per the product label, each Hi - Yield Fast Acting Lime 25lb bag covers 5,000 sq ft and to raise the ph level of 6.0 and above, you will need 9 x 25lb bags to fully treat one acre.
Please refer to the chart on the product label and refer to the product label for more information.Â