Per the instructions on the Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide product label: "For initial clean up of severe insect infestation, dilute at a rate of 6.7 ounces of this product to 1 gallon water. For normal infestations dilute 1 1/3 ounces of this product to 1 gallon of water."
Please be aware that it usually requires the use of several different types of products to fully eradicate a bed bug infestation. We recommend that you look over our bed bug treatment guide if you have a moment. You can find the guide on our website here.
It is recommend that you remove pets, including horses and frogs, out of the area while the Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is being applied. Once the product has dried completely, it is safe for them to return to the area.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide would not be the best product, Permethrin tends to break down faster than other synthetic pyrethroids. We would recommend to use Talstar P, you can use it at a rate of 1 oz per gallon of water and spray your flagstone patio thoroughly and since it's a porous surface, it would be best to spray every 21 days because porous surfaces suck in liquids. Neither product should be harmful to chipmunks.
Yes The Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is safe to use around pets when used as directed on label, and keeping pets away from the treated areas until the product has completely dried.
We do not recommend mixing Hi-Yield Indoor/Outdoor 10% Permethrin with any other insecticides. You can however, mix a synergist like ExciteR Insecticide with any of the 3 products to get a quick knockdown effect.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is not an organic product but a synthetic pyrethyroid. It is safe to use on winter squash when used as directed on the product label.
How long it takes for Hi-Yield Indoor/Outdoor Insecticide to kill a bed bug depends on a number of factors, such as how long the bed bug spent in contact with a treated surface and what life cycle stage it is in. Keep in mind that, while this product is technically labeled for bedbugs, it is not typically recommended to treat this pest as there are other products which are much more effective. We normally recommend using one of our bed bug kits so that you will have everything necessary to completely eradicate a bed bug infestation. You may want to take a moment to look over our Bed Bug Guide for more information.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide should be mixed at 1 oz. per gallon of water for yellow jackets.
The mixing rates for Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide will vary depending on where and what you are treating. Per the product label: For lawns, use 0.5 oz. per 3 gallons of water per 1,000 sq. ft., or for and for indoor/outdoor plants, trees, and shrubs, use 1 oz. per 4 gallons of water. Please refer to the label for complete application instructions.
Per the Hi Yield Indoor/Outdoor Broad Use Insecticide Product Label: For Outdoor Perimeter treatments for bugs: Use at the rate of 6 2/3 fl. oz. per 1 gallon water to treat 1,600 linear feet with a 6-inch spray band.
For Indoor Use: For initial clean up of severe Insect infestation, dilute at a rate of 6.7 fluid ounces of this product to 1 gallon water of used. For normal infestations dilute 1 1/3 fluid ounces of this product to 1 gallon of water used.
Hi-Yield Indoor/Outdoor Broad Use Insecticide is safe to be used around dogs, and other household pets, as long as they are not in the area during application. They are safe to re-enter once the product has completely dried.
Areas treated with Hi-Yield Indoor/Outdoor Broad Use Insecticide are safe to return to once dry, typically after 1 hour when applying to surfaces inside.
When applying as a space spray, per the product label: Keep area closed for at least 15 minutes. Vacate area after treatment then thoroughly ventilate before occupying.
Typically, you can re-enter after 2 hours for these types of applications.
No, the manufacturer recommends applying Hi-Yield 10% Permethrin with a pump sprayer or hose end sprayer. It can be applied to edible vegetation that is listed on the product label. Please click the following link for additional information.
Yes the Hi Yield Indoor/Outdoor 10% Permethrin can be used as the adulticide to mix with the Nylar for flea control, however you may find better options by looking at some of our flea control kits on our page. The products we have paired together will not smell as bad as the Hi Yield and will give you a wider usage area both indoors and out. If you use the Hi Yield it would be 1 1/3 ounce to 1 gallon of water mixed with 1 ounce of Paragon Surge Nylar. You can see our Flea Products here:
Flea Control
http://www.domyownpestcontrol.com/fleas-c-24.html
Indoor/Outdoor Flea Kit
http://www.domyownpestcontrol.com/outdoorindoor-flea-kit-p-1349.html
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is used to spray around baseboards, cracks and crevices. If items were accidently sprayed, we would recommend washing them.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide is not labeled to treat for Bed Bugs. Please visit our Bed Bug Guide for the most up to date Bed Bug tips and videos.
You could use the Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide for ants around the perimeter of the structure and/or to treat individual ant mounds. Per the product label for Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide: Use at a rate of 6 2/3 fl. oz. per 1 gallon of water to treat 1,600 linear feet with a 6-inch spray band. For a large area for ants, we would recommend Talstar P, which you would apply at a rate of 1 oz. per gallon of water or per 1,000 square feet in the yard. We also would recommend treating individual ant mounds as directed on the product label of whichever product you are using.
Hi-Yield Indoor/Outdoor 10% Permethrin Insecticide would be a great product to use to treat for Leaf Miners and will not harm Day lilies. Be sure to apply in the cooler times of the day. Earlier morning or evening.
