Dan from Pittsburgh Pa writes
I had my house serviced by a pest co.and they drilled holes every 12 inches,how much solution of the Termidor Sc or Talstar P should I spray in the ground were the holes were drilled(concrete)...Dan
We recommend you use the Termidor SC as it is a much better termite control product. Per the product label you will still need to use 4 gallons of finished solution for every 10 linear feet. So if there is 1 hole every 12 inches you should apply .4 gallon of diluted solution per drilled hole to achieve the correct continuous barrier rate. You can use a sprayer with the nozzle adjusted to pinstream to apply the product to the holes or you can use a funnel inserted into the drilled holes and pour the solution in with a bucket.
Answer last updated on: 03/20/2013
