• Please Note: If you have questions about an order you placed, shipping policies, product availability or product returns, please do not use this form. Direct these questions to our customer support center or by calling 866-581-7378.

    Most product questions are answered within 24 hours.
    Not all questions and answers will appear on our website. Thank you for choosing DoMyOwn.com!
  • * (limit 110 characters)
  • (optional)
  • *
  • *
  •   (city, state)
  •     Cancel

Q&A Home

Laryy from Rushville, Il writes,

How much Termidor SC do I apply to each hole in a cement block foundation a termite application?


When treating a block foundation with Termidor SC, you should drill a hole in each void so there would be 2 holes per block.  The holes should be no more than 18 inches high.  Usually, you want to drill on the second row of blocks high from the ground.  In addition to drilling the holes, you should also trench and treat the outside foundation wall and the inside foundation wall if you have a crawl space.  After drilling the holes, you are supposed to apply 2 gallons of solution per 10 lineal feet into the blocks.  For filling trenches and drill holes going vertically into slabs, you should apply 4 gallons per 10 lineal feet.  Please let us know if you have any further questions. Click on the link below for more information on treating termites.

How To Perform A Termite Treatment

Answer last updated on: 07/09/2015

3 of 4 people found this answer helpful. Was it helpful to you?   Yes No