By DoMyOwn staff
How to Use Cy-Kick Aerosol
Hi, I'm Michael with domyownpestcontrol. This is a product snapshot on Cy-Kick Aerosol. Cy-Kick is a residual aerosol which is meant to be used in cracks and crevices for long term control, if you're purchasing a residual aerosol these already come with straw nozzled installed. This is because you really only want to use residual aerosol in cracks and crevices.
To safely attach the straw to the nozzle, you'll want to remove the nozzle from the top of the can. This is for safety so it does not accidentally discharge while you're attaching the straw. Just grab the nozzle with your thumb and fore finger and pull directly up. When installing the straw, you want to hold the straw toward the very end and force it in the hole. It is a very exact fit. An easier way those is to take a pair of plyers and hold it right on the end of the straw and then force it in the hole, works everytime.
Once you have the straw attached the the nozzle, you'll need to reattach the nozzle back onto the can. We're going to go outside to demonstrate this, for safety.We like you to go outside because in case it accidentally discharges, it doesn't get over something it shouldn't. One, make sure the straw is facing away from your face, so it doesn't accidentally discard on to you. At the bottom of the spray nozzle is a hole, align it over the straw, point it at the ground, press firmly for a few seconds. The can will discharge, but as you can tell it takes a quick force to put the straw on the can.”
