Iron Max AC 6 15 - 0 - 0 can be applied with a hose end sprayer if that is what you mean as long as it can be set to the rate needed per gallon. The application rate is 3 tsp. per gallon of water.
Iron Max AC 6-0-0 is not labeled for residential lawns.
The rate Iron Max AC 6-0-0 for residential lawns is 3 tsp. per gallon of water per 1000 sq. ft. You would need to set the hose end sprayer to that rate.
Per the product label for ornamental grassed, you can apply Iron Max AC 6% 15 - 0 - 0 every 30 days or as needed.
Iron Max AC 6% 15 - 0 - 0 does not state it needs to be watered in after applying. Just be sure to use the correct amount of water during application.
The application rate of Iron Max AC 6 - 0 - 0 is 3 tsp. per gallon of water for lawns. One gallon of mixed solution typically covers 1000 sq. ft.
Iron Max AC 6-0-0 is not labeled for residential lawns.
Iron Max AC 6 - 0 - 0 does not state it needs to be watered in after applying or with the use of a surfactant. Just be sure to use the correct amount of water during application. It can be applied with a hose end sprayer or backpack sprayer.
One gallon of mixed solution of Iron Max AC 6 15 - 0 - 0 will cover 1000 sq. ft.
Since we do not know the overall health of your lawn, it is impossible for us to say for sure whether your lawn will be damaged by using a fertilizer. We can say that the Iron Max AC 6% 15-0-0 is a high-quality product formulated to reduce the risk of any burning. You can use 2 tsp per gallon of water for turfgrass maintenance and apply every 30 days during the growing season.
Iron Max AC 6 15-0-0 is not labeled for use against moss in turfgrass. We suggest a product labeled for this use such as Natural Guard Lawn Weed Killer Selective RTU. We also have a great video here that addresses other conditions that favor moss development.
Any product including Iron Max AC 6 15 - 0 - 0 that contains Iron could potentially stain concrete.
Iron Max AC 6 15-0-0 is applied as a foliar application, soil drench and through overhead, microjet, or center pivot sprinkler irrigation only as directed. Please refer to the product label for instructions for rates for all applications to locate the one to fit your needs.
Iron Max AC 6 15 - 0 - 0 rates will vary depending on the growth height and type of turfgrass you are applying to. Please refer to the product label for complete instructions for your target application.
Iron Max AC 6 15 - 0 - 0 should have a shelf life of at least 5 years from the manufacture date if stored in a temperature controlled environment, and away from any direct sunlight.
For trees, Iron Max AC 6 15 - 0 - 0 is applied at 4 - 8 oz per gal. of water. Thoroughly drench soil around area and use additonal volumes of water if needed to move the product in the root zone. View the product label here.
Yes, you can apply Iron Max AC 6 15 - 0 - 0 on residential lawns. Please be sure to review the full product label before application.
No, the Iron Max AC 6 15 - 0 - 0 is not considered EDDHA.
Iron Max AC 6 15 - 0 - 0 is a fertilizer only and will not effect moss. Determining the cause of moss in the area would be recommended in order to know the best treatment approach. Moss can be caused by: Excessive shade, Poor drainage, Low soil pH, or overall lack of nutrients in soil,
Unfortunately, we currently are not carrying any products labeled for moss in pastures or hay meadows therefore would recommend reaching out to your Local Department of Agriculture to see if there is a recommendation they know to be successful or approved for these areas.
Please view our Moss Treatment Guide for more information that may help with your treatment also.