Application Directions:

Do not apply near water, storm drains or drainage ditches. Do not apply if heavy rain is expected. Apply this product only to your lawn/garden and sweep any product that lands in the driveway, sidewalk, or street, back onto your lawn/garden.

Lawns, Flowers, Vegetables, Ground Covers, Shrubs, etc.:
Apply 3 1/2 lbs. per 100 sq. ft. follow the application by a deep thorough watering to activate product and move it into the soil profile.

Potted Plants:
4-8" pots: Apply 2 teaspoons and water thoroughly.
8-12" pots: Apply 4 teaspoons and water thoroughly.

Trees and Shrubs: 
Apply 1/2 to 1 cup to the soil beneath the trees or shrubs. Water thoroughly.

FAQs:

What is Dr. Iron?
Dr. Iron is a combination of iron and sulfur. Iron is mixed with molten sulfur which then makes up thousands of tiny metal oxide particles in a granule. When the granules come in contact with moisture in the soil, they shatter and disperse, converting from the oxide form to the plant-available sulfate form.

What does Dr. Iron look like?
It is a homogenous granular material that is dull metallic black in color.

Will Dr. Iron stain concrete sidewalks, driveways, patios, etc?
No! Dr. Iron goes out as the oxide form which does not stain. Only after being in contact with soil moisture does it convert to the sulfate form which will stain. Since this is a slow process, Dr. Iron doesn’t stain when accidentally spilled on concrete and contacts moisture.

What about heavy metals (other than iron) in Dr. Iron?
Dr. Iron is one of the most environmentally friendly iron products on the market today. The company that makes the product has invested a great deal of money to manufacture an environmentally sound garden fertilizer.

What is the analysis of Dr. Iron?
Dr. Iron is 22% iron and 55% sulfur, so it takes less product to provide these nutrients to your plants.

Where do I use Dr. Iron?
Dr. Iron can be used on turf (for quick winter and spring green up), flowers, shrubs, vegetables, ground covers, trees, etc. It can be used anywhere in the garden where plants are yellowing or pale due to iron deficiency.

Simply apply 3½ lbs per 1000 sq ft. and water-in after application. On trees and shrubs, scatter ½-1 cup beneath the plants. On potted plants use 2-4 tsp per pot.

Does Dr. Iron help in high pH soils?
Yes. Dr. Iron is an acidifier so it will lower the soil pH. This is especially useful in Western U.S. soils where high pH is a problem.

How is Dr. Iron packaged?
Dr. Iron is packaged in 7 lb shaker cans with a perforated top for easy application, 7 lb resealable bags, 21 lb resealable bag and 40 lb bag.

WARNING: This product can expose you to chemicals including arsenic, cadmium and lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to https://www.P65Warnings.ca.gov