It would be best to wait 48 hours after applying Monterey Spurge Power to water the lawn.
Monterey Spurge Power application rates will vary depending on where and what you are treating. You will use 1-1.25 oz. per 2-5 gallons of water per 1000 sq. ft. Please see the product label for complete application instructions.
Yes, Monterey Spurge Power is labeled for use on St. Augustine grass to kill wild violets. Please refer to the label for complete mixing and application instructions.
Yes, Monterey Spurge Power is a concentrate to be mixed with water. The mixing rate of Monterey Spurge Power is 1 - 1.25 oz. per 2 - 5 gallons of water per 1,000 sq. ft per the product label.
Monterey Spurge Power is labeled as safe to apply to Bluegrass, Fescue, Rye, Bent (excluding golf greens and tees), Bahia, Bermuda, and Zoysia. When used as directed on the label it will not harm turfgrasses listed.
Monterey Spurge Power is applied at 1.0 to 1.25 fl. oz. in 2 gallons to 5 gallons of water per 1,000 sq. ft. Please refer to the product label for complete application instructions. The water acts as a carrier for the herbicide. Whether it takes 2 gallons or 5 gallons, the product should be applied at 1oz to 1.25 oz per 1000 sq ft.
We would recommend that you apply Monterey Spurge Power with a hand pump or backpack sprayer to ensure the most accurate application. The mixing rate is 1 - 1.25 oz. per 2 - 5 gallons of water per 1,000 sq. ft. Please refer to the product abel for complete application instructions.
Monterey Spurge Power is used only as directed to turf lawns. Per the Monterey Spurge Power label: Avoid drift of spray mist to vegetables, flowers, ornamental plants, shrubs, trees and other desirable plants.
Per the Monterey Spurge Power label: Avoid drift of spray mist to vegetables, flowers, ornamental plants, shrubs, trees and other desirable plants.
We would recommend that you apply Monterey Spurge Power with a hand pump or backpack sprayer to ensure the most accurate application.
We recommend to mow at least 2 days prior to Monterey Spurge Power and 2 after application.
Monterey Spurge Power should not harm honey bees as long as they are not sprayed directly or contact the wet surfaces. It is best to apply products when bees are not foraging.
Monterey Spurge Power already contains a sticker/surfactant in the formulation. Tenacity requires an additional one mixed with it for post emergent applications, so we would not recommend tank mixing the 2 herbicides together for this reason as it could injure your lawn.
It would be best to wait 48 hours after applying Monterey Spurge Power to water the lawn.
Monterey Spurge Power and Blindside can be mixed together. Be sure to keep the solution agitated during application.
You can plant in areas that have been treated with Monterey Spurge Power 1 year after application.
Monterey Spurge Power is not labeled to be applied around edible vegetation including grape vines.