Pramitol 5PS Pelleted Herbicide - Questions & Answers

Displaying 1 to 4 (of 4 questions)
Sort:
  • Asked by Ron
    03/17/2015
    Q
    How much Pramitol 5PS should be used per gallon of water?
    I have a 25 gal. sprayer. How much per gallon of water should be mixed? I want zero plant growth
    A

    With a product like Pramitol 5PS, you need to make sure you are using the correct amount of product, versus the amount of water used. Per the product label: For annual broadleaf weeds and grasses, you will use 0.35-0.46 lb. per 100 sq. ft. For most perennial broadleaf weeds and grasses, you will use 0.70-0.92 lb. per 100 sq. ft. The higher rates should be used in areas where there is long growing season or high rainfall. It will also provide longer residual control. We normally recommend using the product in at least 2-4 gallons per 1000 sq. ft.

    Was this answer helpful to you?   Yes No
    1 of 10 people found this answer helpful.
  • Asked by Doug from Council Bluffs Ia
    03/22/2019
    Q
    Can a drop spreader be used for Pramitol 5PS and at what setting?
    Measured out 5 lbs for use on 850 sqft of gravel.
    A

    Pramitol 5PS must be mixed with water as directed on the product label so cannot be applied with a granule spreader.

    Was this answer helpful to you?   Yes No
    1 of 5 people found this answer helpful.
  • Asked by Angela
    03/29/2020
    Q
    Which is better for weed control Pramitol 5PS or Pramitol 25E?
    A

    Both Pramitol 5PS and Pramitol 25E are soil sterilizers, when killing actively growing weeds they work best when mixed with something like RoundUp QuikPro if you want to achieve bareground. Although Pramitol 5PS is no longer available.

     

    Was this answer helpful to you?   Yes No
    0 of 2 people found this answer helpful.
  • Asked by Gavyn from Great Falls, Mt
    06/08/2021
    Q
    How do I reverse the effects of Pramitol 5PS? It killed some grass I didn't want it to
    A

    Unfortunately, normally, to reverse the effects of a product such as Pramitol 5PS, it would need to be done immediately after the application. Sometimes using an activated charcoal product and watering the area may help within the first couple of hours after the application. For more information, we would recommend contacting the manufacturer (Control Solutions) directly at 800-242-5562.

    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
Displaying 1 to 4 (of 4 questions)