Brian from Hopwood, Pa writes
Any info on the spreader settings per 1000sf
We recommend that you consult with the spreader manufacturer for specific settings as this model is not listed on the Crabgrass Control Plus 0 - 0 - 7 with 0.37% Prodiamine Herbicide product label.
The easiest way to determine the correct setting for your needs is outlined below:
If you need to use 3lbs of product per 1,00 sq ft you would add 3 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft). If you have product left, your setting is too low. If you run out of product, your setting is too high. Typically if you walk at a normal pace and set the spreader at the middle setting, that is usually the right amount per 1000 square feet.
Answer last updated on: 03/12/2020
