SDS Hammer Drill
By Anonymous on 07/30/2013
drill bit
By Lionel on 04/15/2014
as described
By N/a on 12/23/2014
Nice Bit
By Mark on 09/18/2015
Great drill bit and you guys rock!
By Steve on 04/29/2017
It is great doing business with you and the hammer drill bit is great. I've done over 150 holes through 4" concrete for termite perimeter treatment and the drill cuts fast and the tip looks like it hasn't been used yet. This bit may last forever! Thanks!
Was this review helpful to you? YesNo
4 of 4 people found this review helpful
Good Drill, but There are Better
By Charles on 08/24/2017
I used the 3/8 x 18 to successfully drill about 15 holes, but there were about 6 that I couldn't get through. So I bought a Bosch Bulldog Xtreme to try on these tough holes, and it worked great. I recommend that DoMyOwn carry this series of bits! They have a much larger carbide element than the one I bought here.
Was this review helpful to you? YesNo
2 of 2 people found this review helpful
Quality and Price
By Jim on 09/29/2017
1/2 INCH X 24 INCH SDS HAMMER BIT
By James on 07/07/2023
Item works well even using regular drill to use when boring through concrete slab during Termiticide treatment for termites. Suggestion: Consider using a shorter (8, or 12 in or so) less expensive bit to intially breakthrough most of the slab saving the longer bit to finish breaking through and of course going deep into the soil underneath. I had to drill through about 30ft of concrete. 1/2 inch holes every 12 inches apart. This technique will save the wear & tear on the more expensive 18, or 24 inch bits to what you bought it to do....TO BORE DEEP INTO THE SOIL for the Termiticide. This technique worked for me. If not you could potentially wear out several 18, or longer (expensive) bits and still not finish the job. Concrete is very unforgiving on the toughest of bits. Great product, got the job done....Goodbye termites!
Was this review helpful to you? YesNo
1 of 1 people found this review helpful
