Southern Ag Chelated Liquid Iron - Questions & Answers

Displaying 21 to 31 (of 31 questions)
Sort:
  • Asked by Blair from Mi
    04/15/2021
    Q
    How early in the growing season can Southern Ag Chelated Liquid Iron be applied?
    A

    There is not a specific time stated on the product label to apply Southern Ag Chelated Liquid Iron. This product can be applied any time between the temperatures of 55-85 degrees. Southern Ag Chelated Liquid Iron is best applied in the morning or evening to prevent burning on your lawn during the high heat of the day. It is typically best to wait 2 days after applying products like Southern Ag Chelated Liquid Iron to mow. You may reach out to your Master Gardener at your local cooperative extension office for more advice on when to apply in your specific region.

     

    Was this answer helpful to you?   Yes No
    6 of 6 people found this answer helpful.
  • Asked by Kenneth from Sanger,texas
    06/19/2021
    Q
    How long after applying liquid iron can you let your pets out on the grass.
    A
    Pets can return to the treated area of Southern Ag Chelated Liquid Iron once it has dried. Typically at least 2 hours. 
    Was this answer helpful to you?   Yes No
    5 of 5 people found this answer helpful.
  • Asked by William from Memphis, Tn
    12/01/2020
    Q
    How often should I apply Southern Ag Chelated Liquid Iron to the lawn?
    A

    Southern Ag Chelated Liquid Iron  is to be applied at 8-16 oz per 1000 sq ft with sufficient water to thoroughly wet the foliage and run off into the root zone. You can apply this as needed, usually every 3-6 weeks during the growing season as desired.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Peter from New Berlin. Wi
    07/13/2021
    Q
    wish to use your chelated liquid iron for river birch and need to know dilution for applying into holes
    only way I can apply this product is by creating holes 3-4" deep around the drip line of tree...its a river birch. Need to know ratio of product to water to pour into holes.
    A
    Southern Ag Chelated Liquid Iron is not labeled to be injected into a tree or in holes only as a foliar application to trees or as directed to lawns.

    Was this answer helpful to you?   Yes No
    2 of 4 people found this answer helpful.
  • Asked by Justin from Nampa
    08/02/2021
    Q
    How much Southern Ag Chelated Liquid Iron per inch diameter for trees that have chlorosis?
    A

    Southern Ag Chelated Liquid Iron is not labeled for soil drench applications. This product is only directed to be applied as a foliar spray application to Flowers, Shrubs, Trees, Vegetables and Lawns.

    For foliar spray applications, mix 1 tbsp per gallon of water and for lawns, apply to foliage to the point of run off. For lawns, mix 16 fl oz per 1000 sq ft in a sufficient amount of water to evenly and thoroughly cover 1000 sq ft. 
     

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Joseph from Gilbert
    08/28/2021
    Q
    What is the percentage of iron in Southern Ag Chelated Liquid Iron?
    A

    Southern Ag Chelated Liquid Iron contains 5% iron. Please view the full product label for more information. 

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Nancy
    08/28/2021
    Q
    What is the mix rate of Southern Ag Chelated Liquid Iron per gallon of water to use at the base of a River Birch Tree?
    A

    The Southern Ag Chelated Liquid Iron product label states to use it as a foliar application on trees and shrubs, and to mix 1 tablespoon per gallon of water. It does not give rates for a drench applications so you would need to consult the manufacturer for using it in this method. 

    Was this answer helpful to you?   Yes No
    1 of 2 people found this answer helpful.
  • Asked by Peter from Glendale Heights Il
    03/22/2024
    Q
    2000 sq feet lawn, how to use Southern Ag Chelated Liquid Iron
    How much water and product should I put into my pump sprayer for 2000 sq ft ? Can I go heavier on liquid iron with same amount of water ? Should I water in after application and how long should I wait to do this if so ? If I use Ortho Dial N Spray do you know what setting I should place it at for 2000 sq ft >
    A
    Per the product label for Southern Ag Chelated Liquid Iron on Lawns you use 8-16 oz per 1,000 square feet in a sufficient volume of water to thoroghly wet the foliage and run-off in the root zones.  The rate is not give per amount of water as water is just the carrier and is not set.  You do not need to irrigate/water in after application when sufficient water is used and should apply when no rain/irrigation occurs within 24 hours.

    We have a video here that explains how to calibrate your sprayer for the amount of water it takes you to cover 1000 sqft
     
    We would not advise using a hose-end sprayer as most do not go tas high as you need for this product and the rate is not set per gallon of water dispersed as a hose end needs. 

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Paul from Albany, Ny
    06/08/2022
    Q
    Does Southern Ag Chelated Liquid Iron kill mycorrhizae bacteria?
    A

    Southern Ag Chelated Liquid Iron is not labeled to treat for mycorrhizae bacteria. We would suggest contacting your county Cooperative Extension Office for recommendations on a product shown to be successful in your area. 
     
     

    Was this answer helpful to you?   Yes No
  • Asked by Gil from Upper Marlboro, Md
    10/08/2024
    Q
    How soon can I use Southern Ag Chelated Liquid Iron after over seeding my lawn?
    How soon can I use this product after over seeding my lawn?
    A

    It is advised that you wait to apply Southern Ag Chelated Liquid Iron after a few weeks of germination and the grass has established itself and is actively growing

    Was this answer helpful to you?   Yes No
  • Asked by Terry from Houston Texas
    11/01/2024
    Q
    Will spraying Southern Ag Chelated Liquid Iron in the fall give results?
    I used the Southern Ag chelated iron at a rate of 1 oz. Per gallon and sprayed on some gardenias and some yellowing St. Augustine at the end of October while temps were still in the 80’s during the day with no visible change. Is the dosage too low? The water I mixed it in had a PH of 6.5
    A

    Southern Ag Chelated Liquid Iron can be applied in the fall if your lawn/plants are showing signs of irion deficiency, it is applied at 1 tablespoon per gallon. It typically can take about 7-10 days to obtain full color. Please view the full product label for more information.   It is applied in the spring for best results when new growth is emerging.

    Was this answer helpful to you?   Yes No
Displaying 21 to 31 (of 31 questions)