We don't have the exact spreader setting for your model spreader. The easiest way to determine the correct setting for you needs is outlined below:
If you need to use 3lbs of product per 1,00 sq ft you would add 3 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft). If you have product left, your setting is too low. If you run out of product, your setting is too high
If you need to use 3lbs of product per 1,000 sq ft you would add 3 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft). If you have product left, your setting is too low. If you run out of product, your setting is too high
Talstar EZ Granular Insecticide is not labeled to be used near bodies of water where aquatic life would be as it is highly toxic to them. You can use well water to water the product in after application.