Talstar P Professional Insecticide - Questions & Answers

Displaying 521 to 540 (of 1433 questions)
Sort:
  • Asked by Tom from Oro Valley, Arizona
    03/07/2012
    Q
    What is the best ratio of Talstar (in a 1 gallon sprayer) to control Scorpions?
    A
    You should use 1 oz of Talstar P per gallon of water for scorpion control.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Pete from Lexington, Kentucky
    03/22/2012
    Q
    Can I use Talstar P to treat red spider mites on my burning bushes?
    A
    Talstar P does work for spider mites and can be used on most non-edible plants. We do recommend that you spray a small portion of one of the plants and then wait a couple of days to make sure there is no damage before proceeding with the treatment.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Mk from Parker, Colorado
    03/28/2012
    Q
    Can Talstar P be used to control Zimmerman Pine Moth?
    A
    Talstar P would be a good choice for Zimmerman Pine Moth control. Most treatments for Zimmerman Pine Moths should be done mid April - August (depending on your region) to eliminate active larvae on the tree trunk before they enter the tree.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Jessica from Gonzales,la
    05/03/2012
    Q
    Is there a product that would kill a wide range of pests? Specifically, a lawn treatment.
    I want to treat for fleas, ticks, Mosquitos, ants & other bitey-stingy-itchy bugs.
    A
    Talstar P is labeled for use on lawns and is labeled for all of the pests you mentioned and many others. Talstar is odorless, dries clear, is gentle on plants and can be used indoors and outdoors for insect control. Be sure to read the Talstar P product label for complete usage instructions for the types of pests you are trying to control as the concentration and application placement will vary.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Elwood from Salisbury, Maryland 21804
    05/07/2012
    Q
    What should I use to control mites in my chicken coop and yard?
    A
    Talstar P is labeled for use in poultry houses and in yards for poultry mite control. Be sure to read over the Talstar P product label for complete usage instructions.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Brad from Hagerstown, Md
    05/24/2012
    Q
    I have a caterpillar eating the top of a blue spruce tree. What product do you recommend to kill them?
    The tree is about 7 feet tall and the caterpillar or worms are all over.
    A
    It is important to have the caterpillar identified so that we can make the best product recommendation for your needs. Without the exact identification we would recommend Talstar P as it is a broad spectrum insecticide that can be sprayed on blue spruce trees.
    Was this answer helpful to you?   Yes No
    3 of 13 people found this answer helpful.
  • Asked by Nicole
    06/11/2012
    Q
    Can I apply talstar to newly seeded grass?
    A
    Talstar P is water based and is known to be very gentle on plants and it should be fine to spray on your newly seeded grass. We do recommend that you do not spray during the hottest part of the day. We also recommend that you spray a small section and wait a couple of days before spraying all of the grass to make sure damage does not occur as some plants may be super sensitive to any chemical.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Angel from Capitol Heights,md
    06/13/2012
    Q
    How often should I spray Talstar P for a roach infestation?
    A
    For indoor roach control you can spray Talstar P once every 14 days at the beginning of the treatment program and then reduce the applications to once every 90 days for maintenance.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Sharon from Scurry Texas
    06/25/2012
    Q
    Grasshoppers, plague proportions, what's the recommended product?
    I would like to use a hose end sprayer with the water hose. I see the video of a gallon jug - being used only around the edges and crevises. I've got to cover the entire ground.
    A
    You can use Talstar P to cover non fruit bearing trees, lawns, bushes, shrubs and other areas excluding edible vegetation. Talstar P can be used in a hose end sprayer and should be diluted 1 fl oz per gallon of water for the fastest knockdown and the longest lasting residual for grasshopper control.
    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Roland from Santa Fe Tx, Galveston County
    06/29/2012
    Q
    What should I use for a heavy infection spidermites in 20 ft tall junipers?
    junipers 20ft tall how to best controll galveston tx.
    A
    Talstar works well for both the mature and the immature spider mites. Talstar provides optimal spider mite control when applied during spring to mid-summer. Higher application rates and/or more frequent treatments may be required for acceptable spider mite control during mid- to late-summer. The addition of a surfactant or horticultural oil may increase the effectiveness of Talstar. Talstar applications may be rotated with those of other products  that have different modes of action in control programs that are designed  to manage resistance by two-spotted spider mites. Consult your local Cooperative Extension Service for resistance management recommendations in your region.
    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Hiya from Portland, Oregon
    07/11/2012
    Q
    Can Talstar get tracked into the home?
    This product leaves a dry residual (which obviously then sticks to & kills bugs) and is also recommended for spraying around doorframes. Thus the dry residue will get stepped on when people come & go through the door, and so it seems at least some product will definitely get tracked into the house. This seems to be a possible health concern, as it will then get further tracked onto rugs/furniture/etc, where it is NOT supposed to be applied. Is this reasoning correct?
    A
    No. Talstar does not get stuck to bugs as you described. Talstar will bind to the surface on which it has been sprayed and insects must be on treated areas for a certain length of time to receive a lethal dose. That is why the Talstar P label recommends that you spray the product directly into areas where insects harbor and travel and that broad areas are treated around the home.
    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Brenda from Lanesboro, Mn
    10/17/2017
    Q
    What does Talstar P do to pests? Kill them or keep them away?
    A

    Talstar P (Talstar One) kills insects as they come into contact with the treated area (perimeter, bushes, lawn, ornamentals, baseboards, around windows, doors) 

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Johnnie from Belmont, Nc
    11/17/2017
    Q
    Is Talstar, sprayed from a backpack mister, effective on cankerworms?
    A

    Talstar is not labeled for cankerworms.  The most widely recommended product to use for cankerworms is Bacillus thuringiensis, or B.t.  A product like Monterey B.t. Insecticide may be a better option for you.  There is a great article here on the treatment and prevention of cankerworms. 
     

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
  • Asked by Marsha from Hoagland, In
    01/22/2018
    Q
    Can Talstar P be mixed with a fungicide and applied to flowering perennials all in one application?
    A

    As long as you follow instructions for each product you can tank mix Talstar P (Talstar One) with a fungicide.  Applications to blooms should be avoided.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Tara from Se Cape Coral
    05/19/2018
    Q
    how long after mixing and useing..if theres leftover..is it still good...and for how long?
    do you do room by room ?or can you do it 2/3/days.....cant afford to waste any talastar..so is there a shelf life of the mixture....or do i have to make a new mix..
    A

    Talstar P (Talstar One) should be used within 24 hrs of mixing with water and then discarded. 

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Tara from Cape Coral
    05/21/2018
    Q
    How long will Talstar P last once mixed?
    A

    You should use Talstar P (Talstar One) within 24 hours of  mixing.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Ericka from Fond Du Lac, Wi
    05/21/2018
    Q
    Can I mix Talstar P with a weed killer?
    A

    Most insecticides and herbicides are able to be tank mixed together, just make sure you follow each product label instructions for "tank mixing" instructions. You would want to keep kids out of the area while treating, they can return once the are has completely dried 

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Sally from Fl
    05/28/2018
    Q
    What tablespoon setting should I use for use Talstar P with a hose sprayer?
    A

    Talstar P is mixed at 1 fl oz (2TBSP) per gallon of water per 1,000 sq ft.

    Was this answer helpful to you?   Yes No
    3 of 3 people found this answer helpful.
  • Asked by Bruce from Limcoln, Ne
    05/28/2018
    Q
    Will Talstar P pollute well water or make it unsafe to drink?
    A

    Talstar P should be applied at least 5 feet away from a well.

    Was this answer helpful to you?   Yes No
    3 of 6 people found this answer helpful.
  • Asked by Eddie from Carteret, Nj
    05/28/2018
    Q
    I accidentally mixed 2 oz of Talstar to 1 gallon of water. Will that make the product less effective?
    A

    It should not harm anything to apply Talstar at this rate one time. We recommend that you wait for 30 days outside (90 days inside) to reapply at the rate of 0.5-1 oz per gallon of water.  

    Was this answer helpful to you?   Yes No
    3 of 4 people found this answer helpful.
Displaying 521 to 540 (of 1433 questions)