Yes, Talstar P will be a great choice for treating listed areas for Japanese Beetles. You will mix 1 oz per gallon per 1,000 sq ft.
You should only apply surfactants and spreader stickers with Talstar P for exterior applications only.
While we do not recommend to apply Talstar P (Talstar One) at a higher rate than 1oz, your lawn should be just fine. Please keep in mind that it's also recommended to apply during cooler times of the day.
Talstar P (Talstar One) dries within approx. 2 hours. After that rain will not wash it away for at least 2-3 months.
Per the Talstar P label, when applying mixed solution, the applicator needs to wear shirt, shoes, socks, pants and waterproof gloves. If applying in a non-ventilated area, applicator will need to wear a resperatory mask. You may look at our Basic Safety Kit for the necessary protective gear.
No, using Talstar as a perimeter spray 3ft up and 3ft out from the home will not affect the Termidor SC as long as the Termidor has had time to bond to the soil after 24 hours. Mix Talstar at 1oz per gallon of water and apply over 1,000 sq ft.
Yes, Talstar P can be used when the chickens are not in the coop. Once the product has dried completely, it is safe for them to return to the area. This is generally between 2-3 hours.
Talstar P will kill camel crickets. Apply Talstar P as a crack and crevice or spot spray to areas where pests hide, such as baseboards, corners, storage areas, closets, around water pipes, doors and windows, behind and under refrigerators, cabinets, sinks, furnaces, stoves, the underside of shelves, drawers and similar areas. Do not use as a space spray. Pay particular attention to cracks and crevices. We recommend treating the outside perimeter to help stop insect pests from coming indoors to start with. Apply Talstar P to a band of soil and vegetation 6 to 10 feet wide around and adjacent to the structure. Also, treat the foundation of the structure to a height of 2 to 3 feet.
All of the surfaces that were incorrectly sprayed will need to be thoroughly washed with soap and water to remove the product. After the areas have been washed they will be safe to use again.
We recommend applying Talstar anytime of the day EXCEPT during the middle of the day. The key with mosquitoes is to apply to the underside of the leaves as that is where the adults lay during the day.
Unfortunately, Talstar P is not labeled to be used on edible vegetables. Please click the link below for a list of products that can be applied to edibles.
Talstar P (Talstar One) can be applied in direct sunlight. Please keep in mind we recommend to apply Talstar P (Talstar One) in the cooler times of the day, early morning or late evening.
Talstar P will do a great job for boxelder bugs! We do not recommend that you use soap with the Talstar P or any other insecticides. The Talstar P may be used to spray directly on the plant foliage and it can be used inside and outside of the home. Please take a moment to look at our "How to Get Rid of Boxelder Bugs" article for more detailed information about this type of pest.
Per the Talstar Label, to ensure optimum control, delay watering (irrigation) or mowing for 24 hours after application. If the grass area is being maintained at a mowing height of greater than 1 inch, then higher application rates (Up to 1 fluid oz. per 1000 square feet) may be required during periods of high pest pressure.
There is no valid reason to mix Suspend SC and Talstar P together. Talstar P is a synthetic pyrethroid and Suspend SC already contains a synthetic pyrethroid, so there would be nothing to gain by mixing these products together. Making a pesticide too strong can actually backfire. Areas that are treated with this overly concentrated spray will be repellent and insects will simply avoid the treated areas prolonging the infestation.
We advise to use your solution with 24 hours after mixing to gain full effectiveness of the product. The Talstar P (Talstar One) has a shelf life for up to 3-5 years when stored out of extreme tempertures. Please let us know if you need anything else.
Talstar P(Talstar One) will kill deer flies that come in direct contact with the treated surfaces.
Talstar P (Talstar One) is safe to use around animals as long as they are out of the area while you are spraying, they can return as soon as the area is dry. Although The Talstar P (Talstar One) is safe once it's dried, you do not want to apply directly to water, or to areas where surface water is present or to intertidal areas below the mean high water mark. Drift and run-off from treated areas may be hazardous to aquatic organisms in neighboring areas.