Talstar P (Talstar One) can be shipped to Detroit, Michgan. Unfortunately, we do not ship outside of the US, so we are not sure if you can enter Canada with this product.
When using Talstar P for ticks in the lawn, the rate is 0.5 - 1.0 oz. per 1000 sq. ft. in at least 1 gallon of water. So for 200 gallons, you would use 100-200 oz. Treat the entire area where exposure to ticks may occur. Use higher spray volumes when treating areas with dense ground cover or heavy leaf litter. Ticks may be reintroduced from surrounding areas on host animals. Retreatment may be necessary to achieve and/or maintain control during periods of high pest pressure. Repeat application is necessary only if there are signs of renewed activity. Limit repeat application to no more than once per seven days
Talstar P is not really labeled for use in cars. We would recommend using something like D Force Aerosol instead.
Talstar P is not specifically labeled for Orius or Pirte Bugs. Please provide the targeted area for an alternate recommendation. Thank you!
Talstar P is not labeled to treat TPPD. We recommend that you consult with your local cooperative extension office for recommendations on what would be appropriate to apply. You can also find a great article here that might help.
Our most popular general use product is called Talstar. It is labeled for over 75 different pests, can be used indoors and outdoors, and is pet safe if used as directed.
Talstar works great for mosquito control and it can be used in your mister. The key is to apply it to all shrubs, trees, and other foliage around the house or where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out during the heat of the day. Talstar should be applied every 30 days for optimum control.
The mixing ratio for mosquitoes is 1 fl oz per gallon of water.The key is to apply the Talstar P it to all shrubs, trees, and other foliage around the house or where you are trying to provide relief. It should be directed not only on top of the leaves and plants, but on the underside of the leaves as well which is where the mosquitoes hang out during the heat of the day. Talstar P should be applied every 30 days for optimum control. Please see our Mosquito Treatment Guide for more tips.
Yes, Talstar is labeled for ants and can be used indoors. You may want to look over our Ant Control Guide for more information on treating this pest.
It would be recommended to steam clean the carpets to remove any Talstar P residual as it is not labeled to be broadcasted on carpets.
Talstar P (Talstar One) is a non-staining product that should not be applied to wood floors only cracks and crevices as directed indoors.
Talstar P (Talstar One) is not directly labeled for maggots for the common house fly, but it would help with the maggot control as it would cause the fly population to decrease rapidly. It should be mixed at 0.5 to 1.0 oz. per gallon of water and applied on the exterior of the home focusing around windows, doors, areas of direct sunlight and where you notice the flies congregating. Using a fly bait trap such as the Flies Be Gone Trap to draw the flies away from the home is also recommended.
Talstar P (Talstar One) is not labeled for parasites. We apologize but we do not carry anything for for intestinal parasites/parasites.
When using Talstar P for mosquito control, it’s best if you can treat the underside of the tree leaves as high up as possible. The more surface you’re able to treat, the more effective your treatments will be.
Permethrin SFR and Talstar P should not be mixed together. You would use one or the other.
One of our most popular general use products is called Talstar. It is widely used by pest control companies because it is labeled for almost every insect you could have a problem with including roaches and ants. This product can be used inside and outside of the home, it is odorless, dries clear and very safe for use around children and pets. It is a liquid concentrate that you mix with water in a one gallon hand pump sprayer. The mix rate is 1 oz per gallon of water. It will last for 90 days indoors and 30 days outdoors.
Talstar P will kill stinkbugs. You should dilute one ounce of Talstar P per gallon of water. You will use a hand pump sprayer to apply the solution on all door frames, window frames, areas where utilities (cables, pipes, wires) enter into the structure, a band of soil 6 to 10 feet adjacent to the structure, also to a height of 2 to 3 feet on the foundation where pests may be active or may find entrance. As the stink bugs crawl over the treated area, they will receive a lethal does of the insecticide and usually die within a few hours. You should treat every month starting in August and ending in November for best results. It is also labeled for Asian beetles aka lady beetles and should do a good job.
