Product Q&A

« See More Q&A's

Rodney from Royal Palm Beach, Fl writes

What are the mixing recommendations for Celsius WG?

I have a ortho dail N spary hose end sparyer that is 32oz how much should i mix in for a 1/8 of an acre with the sprayer dial at 1oz to a 2oz ratio

Answer:

This product will not work well in a hose end sprayer because those sprayers are not accurate enough to apply the correct amount of product. You will need to use a hand pump sprayer and uniformly spray the product over the specified area.As with most herbicides the exact volume of water is not very important, you just need to be sure you are getting the correct amount of product on a specific area. Celsius may be applied at three different rates depending on the weeds to be controlled. For the appropriate rate and species consult USE RATES FOR WEED CONTROL section on the Celsius product label. For spot applications, add the specified product rate of 0.057-0.113 oz (1.6-3.2g) to enough water to create approximately 1 gallon spray solution. One gallon of spray solution will treat up to 1,000 sq ft. For maximum weed control with broadcast applications, add non-ionic surfactant.

Answer last updated on: 02/08/2013

Was this answer helpful to you? Yes No

49 of 76 people found this answer helpful.