Product Q&A

Answer:

We don't have the exact spreader setting for your model spreader. The easiest way to determine the correct setting for your needs is outlined below:

If you need to use 3lbs of product per 1,000 sq ft you would  add 3 lb of product to spreader, start with a medium setting, then apply product to a 20 x 50 ft area (1,000 sq ft).  If you have product left, your setting is too low.  If you run out of product, your setting is too high.  Typically if you walk at a normal pace and set the spreader at the middle setting, that is usually the right amount per 1000 square feet.

Answer last updated on: 05/25/2017

Was this answer helpful to you? Yes No

12 of 18 people found this answer helpful.