Inspect interior and exterior of tank for signs of deterioration (i.e. cracks, bubbling and/or pitting) of body and bottom. Any sign of deterioration indicates possible tank weakening and could result in explosive bursting under pressure. If any of these signs are found, discard tank immediately and replace.
Remove pump by turning counterclockwise allowing residual pressure to escape.
Prepare spray solution following directions on container label.
Fill tank with a maximum not to exceed fill capacity.
Re-insert pump into tank and tighten securely.
Pressurize sprayer with 20-25 strokes of the pump handle.
Point nozzle away from you & depress trigger lever to operate.
Adjust nozzle to desired spray pattern by turning nozzle cap from fine spray to pin stream.
Sprayer Maintenance:
Periodically remove and clean nozzle assembly.
Pump should be periodically oiled by putting 1 or 2 drops of oil down pump rod through opening in cover.
If nozzle clogs, remove complete nozzle assembly. Disassemble nozzle and clean openings of any obstructions.
Never use any tool to remove pump if there is pressure in sprayer.
Note: Always refer to Users Manual for the complete list of How To Use Instructions, Storage and Maintenance. Do not attempt to modify or repair this product except with original manufacturer's parts.
The bottle portion of this product has a tendency to split open at the bottom seam after a few months of use. Unable to purchase the bottle separately is upsetting.