Bifen XTS does not stain, but you cannot spray as a broadcast over cement. You can only spray over cracks and crevices and you can spot treat on the structure where the boxelder bugs maybe gathering and trying to get in.
No, Bifen XTS is not labeled for use on any edibles.
The mixing ratio for Bifen XTS is .75 fluid ounces per five gallons of water.
As long as the surface you are applying Bifen XTS to is not heavily wet or dripping water, it can be applied. Generally you want to apply when rain is not expected within 24 hours after application.
Per the product label for Bifen XTS when treating for armyworms, watering or mowing should be delayed for 24 hours following application.
With Bifen XTS, you will water the lawn for approximately 7.5 minutes to achieve a 1/4 inch of water. This will help the product get down into the soil to eliminate the chinch bugs.
Yes, Bifen XTS is legal to use in Minnesota without an applicators license or permit provided you are not charging to do any services with it. Please let us know if we can be of any further assistance.
The best place to store a product like Bifen XTS is in a secure location that is away from extreme heat or cold. If it is stored in this type of area, the shelf life is 3-5 years from the date of purchase. A storage shed may or may not be a good location depending on how well the temperature inside the shed is regulated.
Bifen XTS will treat for Spider Mites and eggs safely on Juniper.
Bifen XTS will treat roaches outside but we do not recommend that this product is used indoors or for sole treatment for this species of roaches. We recommend that you use our one of our roach control kits for indoor treatment of roaches. Please click on the link here for more information on treating german roaches.
The mixing ratio for Bifen XTS is 0.32 - 0.64 oz. per gallon of water. The setting for a hose end sprayer will depend upon the type of hose end sprayer it is.
Yes, Bifen XTS can be used on potted plants for fungus gnats. It is recommended that you use this product with a gallon pump sprayer. The mixing ratio is .004 -.02 fl oz. per gallon of water. Be sure to apply to the bottoms of the leaves as well. In two gallons of water, you will use .04 fl. oz.
Both Bifen IT and Bifen XTS can be used in areas where there is direct sunlight. Bifen IT is a water-based solution, while Bifen XTS is an oil-based solution. Sometimes one solution is preferred, depending on the target pest, so be sure to check the product labels to make sure you are applying the product appropriately for your needs.
When applying Bifen XTS for chinch bugs, it is not necessary to mix in a surfactant.
Yes, Bifen XTS can be use to treat for spittlebugs using at a rate of .07 - .15 fluid ounces per 1,000 square feet to the in effected area.
Bifen XTS is unlikely to harm flowers if applied according to the label instructions but it is not really selective as far as what insects it controls, so there is a chance that it could harm or kill a butterfly if one were to come into contact with a treated surface.
Bifen XTS is mixed at the rate of 0.32 - 0.64 oz. per gallon of water. If you are making 2 gallons of solution, you will need to use 0.64 - 1.28 oz. of Bifen XTS in 2 gallons of water.