BORACARE when used as directed on the product label should have no negative effect on the flooring. Bora-Care dries clear and is used for this purpose all of the time, so it is no problem to stain and seal the wood after Bora-Care has been applied.
Thank you for your feedback. We appreciate your business! You may still be able to use Boracare as you have described, depending on the rate at which you mix it. 1:1, 1:2, 1:3 and 1:4 mixture ratios must be used within 24 hours to prevent the product from degrading. A 1:5 mixture ratio can remain stable for up to 30 days. You should do your best to only mix enough solution for the job you are doing that day to prevent having to discard any solution. We are not aware of another product that can be saved for later use once it has been mixed into solution. After that point most products will start to not only break down and be less effective.
The dry time for Boracare is entirely dependent on how heavy you sprayed, the mix rate you used, and how quickly the raw wood you treated can absorb the product. This can be anywhere from a few hours to a few days.
Yes, once Boracare is applied as directed to the raw wood, it is recommended that you wait at least three days for the product to dry and soak through the entire piece of wood. Do not wait longer than six weeks to re-sand/stain/seal the floor.
Once Boracare is applied, it is recommended that you wait at least three days for the product to dry and soak through the entire piece of wood. Do not wait longer than six weeks to re-sand/stain/seal the floor.
Yes. Once Boracare is applied, it is recommended that you wait at least three days for the product to dry and soak through the entire piece of wood and then seal.
When using Bora-care for raw wood applications, you can handle the wood for cutting and turning it into whatever you intend it to be once the wood has dried. This can often take anywhere from just a few hours, to a couple of days, based on how heavy you applied it, and how thick the wood was to provide time for full absorption.