The Chapin 2 Gallon Acetone Promo Sprayer (26127) is used with acetone dyes for decorative concrete professional staining. It features EPDM seals and gaskets that can handle high concentrations from acetone. It has a funnel top to avoid wasting chemicals when filling and pouring, a large poly ergo pump handle that is lightweight yet durable and can be used for a long time. The Poly tank is translucent which allows you to view the tank level without the need to remove the pump cap and is made of a non-corrosive material to most pesticides, herbicides and fertilizers.
If you need any other accessories for the Chapin Acetone Promo Sprayer, we have it here for you.
A valve on the tank or pump cap that removes compressed air from a pressurized tank before opening to fill or clean.
SureSpray Anti-Clog Filter
Prevents clogging of chemicals from tank to nozzle.
Adjustable Cone Nozzle
For precise spraying and to avoid over spraying to targeted areas.
Hose to Tank Assembly:
Make sure white outlet tube is attached to hose.
Insert tube into tank
Proper placement of white outlet tube.
Line up tabs on safety lock connector with notches on the outlet flange of the tank. Inset tabs into notches to form a secure seal.
Slip hose nut down to tank, turn clockwise and tighten as tight as possible by hand.
Refer to Manual for full instructions.
Care, Storage and Maintenance:
1) Do: Rinse tank thoroughly with water only, empty, refill with water. Follow Filling, Pressurizing and Spraying Instructions, except pump unit only 8-10 strokes. Be sure that the wand and nozzle are thoroughly rinsed with water after each use.
2) Do: Open shut-off and allow water to run through discharge assembly.