Chapin Concrete Sprayer 3.5 Gal. (1949) - Questions & Answers

Displaying 1 to 13 (of 13 questions)
Sort:
  • Asked by James from Crosby, Texas
    09/07/2016
    Q
    Can you spray asphalt sealer with the Chapin Concrete Sprayer 3.5 Gal. (1949)?
    A

    Chapin Concrete Sprayer 3.5 Gal. (1949) can be used to apply asphalt sealer.

    Was this answer helpful to you?   Yes No
    13 of 15 people found this answer helpful.
  • Asked by Robert from Danville Pa
    08/20/2016
    Q
    Can a slip resistant additive be used in the Chapin Concrete Sprayer 3.5 Gallon and still flow through the tips provided? What product would be recommended to clean the solvent based sealer after using the sprayer?
    A

    According to Chapin, you cannot use a slip resistant additive in the Chapin Concrete Sprayer 3.5 Gal (1949) due to the additive clogging the tips. Solvent base products are not able to be used in the Chapin Concrete Sprayer 3.5 Gal (1949), and the only cleaning method is to rinse thoroughly with water after use.

    The Extreme Chapin Concrete Sprayers (19049 & 190690) can be cleaned with Xylene and followed up with thoroughly rinsing with water.

    You may contact Chapin directly at 1-800-950-4458 for further questions.
     

    Was this answer helpful to you?   Yes No
    5 of 6 people found this answer helpful.
  • Asked by Raquel
    09/25/2010
    Q
    What is the flat fan spray tip that comes with the Chapin 3.5 Gallon Concrete Sprayer (#1949)?
    I require the smallest 0.10-0.30 gpm.
    A

    The Chapin 3.5 Gallon Concrete Sprayer (#1949) actually comes with two tips, the .50 gpm (6-5797) and the 1.0 gpm (1-5943 bulk tip, 6-5943-blister pack) fan tips.

    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Anonymous from Evansville, In
    05/08/2015
    Q
    Which brass adjustable nozzle fits best? How do I stop it from leaking after spraying?
    Also when I got my sprayer I wanted to test it with water to make sure it was going to do what I needed and it leaks still after release the pressure on it? Am I doing it wrong or how shall I do it so it doesn't leak after I'm done spraying and release the pressure? Thanks for attending to this matter!
    A
    We would recommend checking with the manufactuer Chapin. They are awesome at troubleshooting their sprayers and would be able to tell you exactly what to do. Their phone number is 800-950-4458.
    Was this answer helpful to you?   Yes No
    4 of 4 people found this answer helpful.
  • Asked by Klaenger
    03/19/2019
    Q
    Can you spray bleach through the Chapin Concrete Sprayer without causing damage to the sprayer?
    A

    It is not recommended to use bleach in the  Chapin Concrete Sprayer 3.5 Gal. (1949). The Chapin Industrial Poly Bleach sprayer is specifically made to be used with bleach/bleach products.

    Was this answer helpful to you?   Yes No
    4 of 5 people found this answer helpful.
  • Asked by Brenden
    07/10/2011
    Q
    Does the Chapin 3.5 Gallon Concrete Sprayer also come with the Poly Holster?
    I've seen other sites indicating the attached holster keeps the wand and nozzles secure.
    A
    We would not necessarily call it a holster but you can tell from our pictures that there are attachments on the tank that keep the wand attached to the tank and in place when you are carrying or transporting the unit.
    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Phillip
    06/23/2018
    Q
    I have a Chapin sprayer model #1949. Do you carry the pump for it (part #301065)?
    A

    Unfortunately, we currently do not carry part #301065 for the Chapin Concrete Sprayer 3.5 Gal (1949). If you're interested, we can have our product specialist check to see if we can carry it.

    Was this answer helpful to you?   Yes No
    2 of 2 people found this answer helpful.
  • Asked by Jack from Spokane, Wa
    05/31/2016
    Q
    What hose do I use with the Chapin Concrete Sprayer 3.5 Gal. (1949)?
    A

    The Chapin Industrial Hose with Fittings is 48 in. and the part number is (6-6091) for the Chapin Concrete Sprayer 3.5 Gal. (1949).

     

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Ruth from Elkland Mo.
    09/06/2021
    Q
    Will the Chapin Concrete Sprayer 3.5 Gal. (1949) hold up (including the seals, gaskets, etc) for exclusively spraying diesel? If so, what are the cleaning procedures for the whole unit after spraying? If not, what other 1-2 gallon sprayers will hold up to spray diesel?
    A

    Chapin does not recommend using diesel in any of their sprayers including the Chapin Concrete Sprayer 3.5 Gal. (1949) because of the safety concern of its flash point and the damage it can cause to the seals. Some folks have used the Chapin Xtreme sprayers, but we cannot guarantee that it would be fit for multiple uses after. Other customers will just use an inexpensive sprayer and dispose of it after use. Be sure not to leave flammable products under pressure.

    Was this answer helpful to you?   Yes No
    1 of 1 people found this answer helpful.
  • Asked by Nga from San Jose, Ca
    07/30/2013
    Q
    Does the Chapin 3.5 Gallon Concrete Sprayer (#1949) need pumping for pressure?
    A
    Yes, the Chapin 3.5 Gallon Concrete Sprayer (#1949) does need to be pumped to build pressure.
    Was this answer helpful to you?   Yes No
    0 of 2 people found this answer helpful.
  • Asked by Tonya from Nashville
    06/21/2021
    Q
    I am trying to spray my concrete with sealer, but it comes out in a stream using Chapin Concrete Sprayer 3.5 Gal. (1949)?
    What tip do you recommend for a spray and not a stream?
    A

    Chapin Concrete Sprayer 3.5 Gal. (1949) comes with a fan tip and should not really be a stream. You should call Chapin to troubleshoot with them on what is causing this. You can reach Chapin  at 800-444-3140. 

    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
  • Asked by Greg from Albany, Ore
    06/09/2022
    Q
    There's nothing for the threads to screw to, to lock down pump and seal it
    A
    We recommend contacting Chapin customer service directly so they may help you troubleshoot and possibly replace the unit if it is defective. Here is a link to their customer support page: https://www.chapinportal.com/guestbook2/
    Was this answer helpful to you?   Yes No
  • Asked by Moe from Edmonton, Alberta
    06/30/2022
    Q
    Why won't my Chapin 1949 sprayer pressurize?
    When I try pumping the pump it feels like it's not pumping.
    A

    We recommend consulting directly with Chapin for troubleshooting tips on your model. They can be reached at 800-950-4458.

    Was this answer helpful to you?   Yes No
Displaying 1 to 13 (of 13 questions)