Per the manufacturer, Clearys 3336F Fungicide has a caution on the label due to the active ingredient. If the product is used per the label, there is less risk associated with it. If you have any additional questions, we would recommend contacting the manufacturer directly at 800-345-3330.
Neither Clearys 3336F Fungicide nor the Clearys 3336 DG Lite Granular Fungicide are labeled for Sclerotium rolfsii, also known as southern blight.
Disarm G Fungicide is a great option for this and is safe for use around hosta plants. The rate is 2.3-4.6 lbs per 1000 square feet. This can be reapplied every 14-28 days as needed.
Clearys 3336F Fungicide mix rates vary dependingon the disease you are treating for. Please refer to the product label for complete instructions for your target disease.
A great product to rotate with Headway G Fungicide is Clearys 3336F Fungicide. You need to rotate fungicides every 14-28 days depending on the label. This product should not be applied when the temperatures are above 90 degrees. If your temperatures reach 90 or above during the day, it would be best to apply in the morning or evening when temperatures are cooler.
Clearys 3336F Fungicide can be applied as a foliar application or a soil drench application for a maple tree. If doing a foliar application it would be applied at 12-16 ounces of product into 100 gallons of water and sprayed all over the canopy and bark. If doing a soil drench application it would be applied at 8-16 ounces of product into 100 gallons of water and poured around the trunk avoiding the drip line.
The amount of Clearys 3336F Fungicide per 1000 sq. ft. will depend on the disease you’re treating. Please see the product label for your specific disease to find out how many ounces is reccomended per 1000 square feet. Once you have determined the labeled mix rate, you will need to find out how much water it will take you to cover 1000 square feet. To decide how much water you want to use, you should mark a 1,000 sq ft area, fill your sprayer with water ONLY, and start walking and spraying just as if you were doing the actual application of herbicide. When you are done walking and spraying the 1,000 sq ft area note how much water it took you to spray that area, and that is the amount you will want to mix the labeled rate of product with for each 1,000 sq ft area that needs to be treated.
Clearys 3336F Fungicide and Clearys granules are both professional strength fungicide products that are effective if used as directed for either formulation.
For rust diseases in trees, your application of Clearys 3336F Fungicide should be made as a foliar spray.
Clearys 3336F Fungicide prevents and controls turf diseases and the diseases of annual and perennial flowers, bedding plants, foliage plants, ground covers, and deciduous and evergreen trees and shrubs. It is not specifically labeled for pink rot on palms so we cannot provide evidence of effective prevention or control. We recommend that you consult with your local cooperative extension office Master Gardener for alternate options.
Clearys 3336F Fungicide is safe on ornamentals for powdery mildew when used as directed on the product label but only lists black spot of rose.
Clearys 3336F does not mention Black Knot Fungus on the label as a disease controlled by it. For additional information, we would recommend you speak to the manufacturer at 800-524-1662.
Typically when treating for diseases you want to rotate your fungicides every other treatment or every two treatments. While tank mixing and applying Clearys 3336F and Propiconazole together can be done if you feel it’s needed due to the severity of the disease in your lawn, you likely will get better results by just rotating between the two every 14 days based on label instructions and the mix rates for your disease.
The rate on Clearys 3336F Fungicide for leaf spot is 12-16 fl oz per 100 gallons, this breaks down to approx .12 to .16 fl oz per gallon of water. Please view the product label here for more information
Clearys 3336F can be applied to established turfgrass and listed ornamentals for the listed diseases on the label as directed.
While Clearys 3336F Fungicide does not list your specific plant on the product label, it is generally safe to use on most ornamentals. We encourage you to have the problem identified before applying fungicides so that you can apply the best product for the disease, if there is one. Ixora are acid-loving plants, so be sure you are pruning properly and using fertilizer specific for acid-loving plants, such as FoxFarm Happy Frog Acid Loving Plants Organic Fertilizer (6-4-4).
Clearys 3336F Fungicide is not labeled to treat for Volutella Blight. Cupro 5000 would be a better option to treat for Volutella Blight on Pachysandra.
