No, Cutrine Plus Algaecide is not labeled for use on wood, only in water.
The typical dilution range of water to Cutrine Plus Algaecide is 9:1 when using a backpack-type sprayer ( 1 part Cutrine and 9 parts water).
The typical dilution range of water to Cutrine Plus Algaecide is 9:1 when using a backpack-type sprayer ( 1 part Cutrine and 9 parts water).
According to the manufacturer, Cutrine Plus Algaecide could potentially be applied in the colder months, however, it is most effective when the water temperature is at least 60 degrees. Please keep in mind that temperature is referencing the water temperature and not the actual outside temp. The product label also states that in regions where ponds freeze in winter, treatment should be done 6 to 8 weeks before expected freeze time to prevent masses of decaying algae under an ice cover.
If it is algae you can use Cutrine Plus to control the algae. You will use .6 - 1.2 gallons per acre-foot of water.
Whether Cutrine Plus Algaecide will work best for your needs will depend on the specific type of algae as well as the severity of the issue. Anytime you are treating heavy growth, it will be more difficult to achieve sufficient control. You should also expect multiple applicaitons for heavy infestations since you should never treat more than 1/3 - 1/2 of a pond at once.
For fast results on most algae, GreenClean Pro is a contact algaecide that destorys algae almost immediately. Keep in mind that many factors contribute to algae growth, including water temperature, excessive nutrients in the water (such as fertilizer runoff), and lots of sunlight. We also recommend using a pond cleaner such as Crystal Blue Natural Pond Cleaner to help reduce dead plant matter, excessive nutrients, and other contributing factors. Many folks also use a pond dye to reduce sunlight deeper in the ponds and to improve appearance.
Cutrine Plus Algaecide is safe for aquatic life when used as directed. Be sure that you do not treat more than ½ of a body of water at one time to reduce oxygen depletion to aquatic animals. Per the product label, Do not use in waters containing Koi and hybrid goldfish. Not intended for use in small volume, garden pond systems. Please refer to the product label for complete application instructions.
You do not want to treat the entire pond with Cutrine Plus Algaecide all at once so that you do not harm the fish or other aquatic life. You will need to treat 1/2 of the pond and wait 2 weeks and do the second treatment. Please see the product label for complete application instructions.
The product label does not specifically mention the affect on equines. We would ask that you call the manufacturer of Cutrine Plus Algaecide directly as they are the true experts on their own product. You can reach them at 1-800-558-5106.
We apologize but we would need to know what type of algae you are treating for, how large the pond is, and what density/concentrate of algae you have in order to provide you with an accurate answer. You can also look at the charts on the Cutrine Plus Product Label to help determine coverage area.
If your pet drank some of Cutrine Plus Algaecide, it's possible it could make him sick. We recommend to contact or go to your vet and have the safety data sheet on hand.
No, Cutrine Plus is an algaecide only and does not control water lilies or any other weeds. Hi-Yield 2,4-D Selective Herbicide is labeled for water lily in aquatic areas.
When using Cutrine Plus Algaecide, aeration and/or fountain system, where available, should be in operation at the time of treatment, per the product label.
Cutrine Plus Algaecide is applied at a rate of 0.6 - 1.2 gallons per acre foot of water treated. We are unsure what you mean by breaking the surface tension, but you can refer to the product label for complete application instructions. You may also contact the manufacturer directly for product support by calling 1-800-558-5106, or via their website's contact page here.
Per the product label, waters treated with Cutrine Plus Algaecide may be used for swimming, fishing, further potable water treatment, livestock watering or irrigating turf, ornamental plants or crops after treatment. It is recommended to let the treatment settle for 1-2 hours before allowing livestock around the water.
Application rates of Cutrine Plus Algaecide range from 0.6 to 1.2 gallons per acre foot of water treated depending on what type of algae you’re treating for. The typical dilution range of water to Cutrine Plus Algaecide is 9:1 when using a backpack-type sprayer ( 1 part Cutrine and 9 parts water). The exact rate will depend on the specific issue you're treating for. Please see the product label for complete application instructions.
The product label for Cutrine Plus Algaecide does not list any specific information about its toxicity to clams. We would recommend contacting the manufacturer, Applied Biochemists at 1-800-558-5106 for an answer to your question.
Cutrine Plus is labeled to control algae including Chara, Spirogyra, Cladophora, Vaucheria, Ulothrix, Microcystis. If you are unsure of which type of algae you may be dealing with, we would suggest reaching out to your local cooperative extension office for help with a positive identification to be sure that this is the correct product for you. Please be sure to review the product label for more information and complete application instructions.
