Cutrine Plus Algaecide - Questions & Answers

Displaying 81 to 86 (of 86 questions)
Sort:
  • Asked by Kyle
    07/22/2021
    Q
    I have a very small pond 100ft x 50ft. Is my pond to small?
    A
    We would recommend reaching out to the manufacturer to see if an amount can be calculated for the amount of area you are treating. You may reach Applied Bio Chemists directly at 800-511-6737 for more information on the correct calculation of the Cutrine Plus for your area.
    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
  • Asked by Sylvia from Moreland, Georgia
    07/23/2021
    Q
    Can Cutrine Plus be used in 500 gal ponds without harm to fish and plants? If so how much to use.
    Water is clear but algae grows on bottom gravel and rock. Green water tint about every 3 days so I'm doing about a 50% water change weekly. Fish and plants are present. Water fall and 4 aquascape aerators in pond. 500 + gallon pond. Can Cutrine Plus be used in my pond?
    A

    Cutrine Plus Algaecide can be used in ponds and lakes to help control different types of algae, except if you have trout, koi fish and hybrid goldfish, Cutrine Plus Algaecide is toxic to these types of fish. We recommend to treat 1/2 of your pond first and wait 14 days to treat the other 1/2 of the pond to avoid fish suffocation caused by oxygen depletion from decaying algae.

    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
  • Asked by Monica from Fennville
    06/03/2019
    Q
    How much water would I add to a 1/2 gallon of Cutrine Plus?
    A

    Application rates of Cutrine Plus Algaecide range from 0.6 to 1.2 gallons per acre foot of water treated depending on what type of algae you’re treating for.  The exact rate will depend on the specific issue you're treating for.  Please see the product label for complete application instructions.

    Was this answer helpful to you?   Yes No
    0 of 6 people found this answer helpful.
  • Asked by Leroy from Mansfield
    03/19/2018
    Q
    I have an Ortho dial & spray. What setting do I use to apply Cutrine Plus?
    A

    The Cutrine Plus Algaecide mixing ratio will depend on what and how you are treating.  It is not usually recommended for use in a hose-end sprayer.  Please consult the product label for complete application instructions.  Feel free to call us at 866-581-7378 with any questions.  

    Was this answer helpful to you?   Yes No
    0 of 4 people found this answer helpful.
  • Asked by Bob from Ohio
    05/25/2018
    Q
    Is it true that Cutrine Plus Algaecide will help control giant water bugs in ponds?
    A

    Cutrine Plus Algaecide is only labeled for controlling algae, we are not aware of any other off label usages such as control of bugs.

    Was this answer helpful to you?   Yes No
  • Asked by Shahyar from Burlington Wisconsin
    08/03/2021
    Q
    Treating a 5000 gallon pond with Cutrine Plus Algaecide. How much do I use and is the sprayed onto the weeds or poured into the pond?
    My pond has a recirculating pump to a stream. There are water lilies in the pond. There are aerators in the pond for oxygenation of water.
    A

    The typical dilution range of water to Cutrine Plus Algaecide is 9:1 when using a backpack-type sprayer or up to 50:1 when using water pump equipment or large tank sprayers. Please read the complete product label for all application directions and precautions.

    Was this answer helpful to you?   Yes No
    0 of 1 people found this answer helpful.
Displaying 81 to 86 (of 86 questions)