Demand CS Insecticide - Questions & Answers

We do not carry Black Flag Foggers and so we cannot make an accurate recommendation. We can say that in the foggers we do carry, the Demand CS particles are too large and have the potential to clog the fogger.

According to the Demand CS product label, delay watering or mowing for 12–24 hours for optimum control of surface-feeding insect pests. 

The manufacturer recommends that you use a buffering agent when the pH is not between 5-7 per the product label instructions when applying Demand CS.

Insecticides should not be exposed to extreme temperatures such as freezing or over heating or left for prolonged periods of time in direct sunlight. In the case of Demand CS, as long it was only frozen for a very short period of time and after it was thawed out it went back into a solution (the way it usually looks) it should be fine to use. If however it appears that there are particles floating at the top, the product now appears discolored, or the product will not go back into a solution, the product should be discarded and replaced.

Demand CS can be applied to the lawn. Dusting is the most effective way to treat yellow jackets and ground nests, using Tempo 1% Dust or Delta Dust and applying directly to the holes with a bellow hand duster.  You will want to treat in the evening time when they are least active. Please review our DIY Treatment Guide for Wasps, Yellow Jackets and Hornets for more information. 

Yes, you can apply Demand CS on and around bushes and shrubs and on grass. In fact you want to spray around the outside perimeter 2-3 feet up and out. Indoors you want to spray cracks, crevices, baseboards. It will not stain should a small amount land on carpeting.

Demand CS is labeled for a variety of insects, including Asian Beetles. The key is to treat early enough (early fall) and to apply the product in the right places. Asian beetles enter the structure through cracks and crevices, especially around windows and doors. Be sure to treat these areas thoroughly once a month through November. Please click on the product label for detailed instructions on application.

Per the manufacturer it is recommended to use anywhere from 0.2 to 0.8 oz/6 to 24 ml per gallon of water.  If you need to make 50 gallons of mixed solution you would use 10-40 ounces of Demand CS for 50 gallons.  Always follow the product label provided by the manufactuer. 

Unfortunantly, we are not currently set up to ship to Canada. Our apologies for any inconveniences this may cause.

Demand CS is labeled for a variety of insects, including Asian Beetles. The key is to treat early enough (early fall) and to apply the product in the right places. Asian beetles enter the structure through cracks and crevices, especially around windows and doors. Be sure to treat these areas thoroughly once a month through November.   You should spray Demand CS outdoors around your door frames, window frames, vents, eaves, around the bottom of your foundation, and any other crack or crevice where an insect could gain entry.

Unfortunately, if you are dealing with them in your house right now you will only see limited results. These move into structures to overwinter. They usually squeeze into wall voids, false ceilings, attics and other areas that are inaccessible to people and insecticides. As the heat kicks on in the house, the bugs warm up and start becoming active and emerge from hiding, driving homeowners nuts. Because most folks usually have no idea where the bugs are harboring you can only treat around baseboards, door frames and window frames and hope the insects will emerge where you have sprayed. After they contact the treated areas, it can take several hours for them to die. It is still worth spraying now to get rid of some of the bugs, but you will keep seeing them until spring when they will emerge en masse and leave your home.

If you mix Demand CS at the 0.3% ratio, it will make 32 gallons if you have the 8 oz bottle and 128 gallons of mixed solution if you have the 32 oz bottle. You will mix 0.4 oz (12 ml) of Demand CS per gallon of water.

Demand CS can be applied to the St. Augustine turfgrass but should NOT be applied to fruit trees. We do carry products for edible vegetation. Please let us know if you need further assistance.

Demand CS will treat black widows and do a great job for other insects as well. The mixing ratio would be 24mL per gallon of water. After spraying, Demand CS leaves thousands of micro particles that bind to the surface offering long-term protection and fast insect knock-down.

You can use Demand CS is in the attic to help control the stinkbugs. Only the stinkbugs that come in contact with treated areas will be killed. We mention this because many of these pests will remain hidden and will not come out until it really starts to warm up so you may have pretty mixed results.

Extreme heat will eventually degrade Demand CS. We recommend that you find a secure location in your home such as a utility closet or laundry room where you can store the sealed bottle out of reach of children.

Demand CS is a great general pest control and works well for spiders, earwigs, ants, mosquitoes and many others. It should be applied monthly outside and inside quarterly. It would be safe if to apply when the dogs are not present until the surfaces are completely dry. 

Yes, Demand CS is labeled for Japanese beetles and can be applied to rose bushes (do not apply directly to blooms).  

Demand CS is not specifically labeled for springtails but the Demand G Granules are labeled for springtail control .Please take a look at our Springtail Control Guide for helpful tips for springtail control and product recommendations. 

Demand CS is a water based professional, microencapsulated  liquid made to stick to porous surfaces. The microencapsulations allow for a longer residual up to 90 days and better protection form UV rays and rain.

When using Demand CS it can take minutes to hours to kill scorpions. The active ingredient needs time to work through the follicle of the insect to the central nervous system.